Volvo G740 VHP Motor Grader


Dimensions

Overall Length 28.34 ft in (8636 mm)
Width Over Tires 8.34 ft in (2540 mm)
Wheelbase 20.5 ft in (6248 mm)
Blade Base 8.92 ft in (2718 mm)
Height To Top Of Isomount Cab 10.17 ft in (3099 mm)

Engine Details

Engine Make Cummins
Engine Model M11
Power Measured @ 2100 rpm
Torque Measured @ 1300 rpm
Max Power 235 hp (175.3 kw)
Net Power Gears 7-8 235 hp (175.3 kw)
Net Torque Gears 7-8 845 lb ft (1145.7 Nm)
Displacement 659.1 cu in (10.8 L)
Aspiration Turbocharged

Operational Specs

Std Operation Weight – Front Axle 10694.7 lb (4851 kg)
Hydraulic System Fluid Capacity 23.8 gal (90 L)
Std Operation Weight – Rear Axle 24916.7 lb (11302 kg)
Std Operation Weight – Total 35611.3 lb (16153 kg)
Fuel Tank Capacity 100 gal (378.5 L)
Cooling System Fluid Capacity 13.3 gal (50 L)
Transmission Fluid Capacity 10.1 gal (38 L)
Rear Diff/Final Drive Fluid Capacity 6.1 gal (23 L)
Tandem Case Fluid Capacity (Each) 26.5 gal (100 L)
Tire Size 14.00 x 24, G-2
Operating Voltage 24 V
Alternator Supplied Amperage 75 amps

Steering

Articulation Angle 22 degrees

Transmission

Transmission Type Powershift
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 27.2 mph (43.8 km/h)
Max Speed – Reverse 19.5 mph (31.4 km/h)

Front Axle

Wheel Lean 18 degrees
Oscillation – Total 16 degrees
Ground Clearance 2.1 ft in (610 mm)

Moldboard

Moldboard Width 15 ft in (4572 mm)
Moldboard Height 29 in (736.6 mm)
Moldboard Thickness 1 in (25.4 mm)
Max Depth Of Cut 31.5 in (800.1 mm)
Side Shift Left 26.5 in (673.1 mm)
Side Shift Right 26.5 in (673.1 mm)
Blade Pull At Max Weight 22424 lb (10171.4 kg)
Blade Down Pressure 18904 lb (8574.8 kg)

Hydraulic System

Pump Type load sensing hydraulic
Pump Flow 48.4 gal/min (183 L/min)
Relief Valve Pressure 2500 psi (17236.9 kPa)

Circle

Diameter 66.3 in (1683 mm)
Rotation 360 degrees
Shift Left 30.5 in (774.7 mm)
Shift Right 29.5 in (749.3 mm)
Max Reach Outside Tires – Left 79.5 in (2019.3 mm)
Max Reach Outside Tires – Right 79 in (2006.6 mm)
Max Lift Above Ground 17.2 in (436.9 mm)
Blade Tip Angle – Front 44 degrees
Blade Tip Angle – Rear 2.5 degrees
Ask a question