Volvo G740B Motor Grader

Dimensions

Overall Length 30.25 ft in (9220 mm)
Width Over Tires 8.34 ft in (2540 mm)
Wheelbase 20.5 ft in (6248 mm)
Blade Base 8.92 ft in (2718 mm)
Height To Top Of Isomount Cab 10.17 ft in (3099 mm)

Engine Details

Number Of Cylinders 6
Engine Make Volvo
Engine Model D10BGAE2
Power Measured @ 2200 rpm
Torque Measured @ 1100 rpm
Max Power 243 hp (181.3 kw)
Net Power Gears 7-8 243 hp (181.3 kw)
Net Torque Gears 7-8 846 lb ft (1147.1 Nm)
Displacement 586 cu in (9.7 L)
Aspiration Turbocharged

Operational Specs

Std Operation Weight – Front Axle 11137.8 lb (5052 kg)
Std Operation Weight – Rear Axle 25988.1 lb (11788 kg)
Hydraulic System Fluid Capacity 35.4 gal (134 L)
Std Operation Weight – Total 37125.9 lb (16840 kg)
Fuel Tank Capacity 120 gal (454 L)
Cooling System Fluid Capacity 13.3 gal (50 L)
Transmission Fluid Capacity 10.1 gal (38 L)
Rear Diff/Final Drive Fluid Capacity 6.1 gal (23 L)
Tandem Case Fluid Capacity (Each) 26.5 gal (100 L)
Tire Size 14.00 x 24, G-2
Operating Voltage 24 V
Alternator Supplied Amperage 75 amps

Steering

Articulation Angle 22 degrees

Transmission

Transmission Type Powershift
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 27.2 mph (43.8 km/h)
Max Speed – Reverse 19.5 mph (31.4 km/h)

Front Axle

Wheel Lean 18 degrees
Oscillation – Total 16 degrees
Ground Clearance 2.1 ft in (610 mm)

Moldboard

Moldboard Width 12 ft in (3657.6 mm)
Moldboard Height 29 in (736.6 mm)
Moldboard Thickness 1 in (25.4 mm)
Max Depth Of Cut 32 in (812.8 mm)
Side Shift Left 26.5 in (673.1 mm)
Side Shift Right 26.5 in (673.1 mm)
Blade Pull At Max Weight 22089 lb (10019.5 kg)
Blade Down Pressure 19711 lb (8940.8 kg)

Hydraulic System

Pump Type load sensing hydraulic
Pump Flow 75.1 gal/min (284 L/min)
Relief Valve Pressure 2700 psi (18615.9 kPa)

Circle

Diameter 66.3 in (1683 mm)
Rotation 360 degrees
Shift Left 30.5 in (774.7 mm)
Shift Right 29.5 in (749.3 mm)
Max Reach Outside Tires – Left 79.5 in (2019.3 mm)
Max Reach Outside Tires – Right 79 in (2006.6 mm)
Max Lift Above Ground 17.2 in (436.9 mm)
Blade Tip Angle – Front 44 degrees
Blade Tip Angle – Rear 6.5 degrees
Ask a question