Volvo G930B Motor Grader


Dimensions

Overall Length 29.3 ft in (8930 mm)
Width Over Tires 8.25 ft in (2537 mm)
Wheelbase 20.43 ft in (6280 mm)
Front Ground Clearance 2 ft in (610 mm)
Blade Base 8.78 ft in (2675 mm)
Height To Top Of Isomount Cab 10.42 ft in (3225 mm)

Engine Details

Number Of Cylinders 6
Engine Model D8HGBE4
Net Power Gear 1-2 119 hp (88.8 kw)
Net Torque Gears 1-2 440.4 lb ft (597 Nm)
Displacement 476 cu in (7.8 L)
Bore 4.4 in (110 mm)
Stroke 5.4 in (136 mm)
Aspiration Turbocharged, Aftercooled

Operational Specs

Std Operation Weight – Front Axle 9920.9 lb (4500 kg)
Hydraulic System Fluid Capacity 24.1 gal (91 L)
Std Operation Weight – Rear Axle 25507.5 lb (11570 kg)
Std Operation Weight – Total 35428.3 lb (16070 kg)
Max Operation Weight – Front Axle 16700.1 lb (7575 kg)
Max Operation Weight – Rear Axle 31400.5 lb (14243 kg)
Max Operation Weight – Total 46958.5 lb (21300 kg)
Oil System Fluid Capacity 5.7 gal (21.5 L)
Fuel Tank Capacity 89.9 gal (340 L)
Cooling System Fluid Capacity 8.2 gal (31 L)
Transmission Fluid Capacity 16 gal (61 L)
Rear Diff/Final Drive Fluid Capacity 6 gal (22.7 L)
Tandem Case Fluid Capacity (Each) 35.4 gal (134 L)
Tire Size 14:00 x 24, G-2
Operating Voltage 24 V
Alternator Supplied Amperage 120 amps

Steering

Articulation Angle 23 degrees
Turning Radius 23835.4 ft in (7265 m)

Transmission

Transmission Type Fully sequential, direct drive, Volvo powershift transmission
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 27.3 mph (43.8 km/h)
Max Speed – Reverse 19.3 mph (30.9 km/h)

Front Axle

Wheel Lean 18 degrees
Oscillation – Total 16 degrees
Ground Clearance 2 ft in (610 mm)

Moldboard

Moldboard Width 12.1 ft in (3658 mm)
Moldboard Height 25 in (635 mm)
Moldboard Thickness 0.9 in (22 mm)
Max Depth Of Cut 31 in (790 mm)
Side Shift Left 26.5 in (673 mm)
Side Shift Right 26.5 in (673 mm)
Blade Pull At Max Weight 28261.1 lb (12819 kg)
Blade Down Pressure 17282.1 lb (7839 kg)

Hydraulic System

Pump Type Axial piston pump
Pump Flow 55 gal/min (208 L/min)
Relief Valve Pressure 3002.3 psi (20700 kPa)

Circle

Diameter 64 in (1626 mm)
Rotation 360 degrees
Shift Left 30.5 in (775 mm)
Shift Right 29.5 in (749 mm)
Max Reach Outside Tires – Left 80 in (2020 mm)
Max Reach Outside Tires – Right 79 in (2010 mm)
Blade Tip Angle – Front 47 degrees
Blade Tip Angle – Rear 5 degrees
Ask a question