CAT CB224E Tandem Roller

Dimensions

Overall Length 96 in (2430 mm)
Overall Width 51 in (1300 mm)
Overall Height with ROPS 102 in (2585 mm)
Height (Steering Wheel) 69 in (1760 mm)
Wheelbase 68 in (1730 mm)
Ground Clearance 10 in (250 mm)
Curb Clearance 21 in (530 mm)
Turning Radius – Outside Drum Edge 142 in (3610 mm)
Turning Radius – Inside Drum Edge 95 in (2410 mm)

Drum

Drum Width 47 in (1200 mm)
Drum Diameter 27.6 in (700 mm)
Eccentric Weight Drive Hydraulic

Vibratory System

Frequency 3780 vpm (63 Hz)
Nominal Amplitude – High 0.02 in (0.5 mm)
Centrifugal Force Per Drum – Maximum 6975 lb (31.4 kN)
Vibration Selection Front, rear or both

Operating Specifications

Compaction Width 47 in (1200 mm)
Max Travel Speed 6 mph (10 km/h)
Operating Voltage 12 V
Alternator Supplied Amperage 55 amps

Engine Details

Number of Cylinders 3
Engine Make CAT
Engine Model Cat 3013C (C1.5)
Gross Power 32.8 hp (24.4 kw)
Net Power 30.9 hp (22.6 kw)
Power Measured @ 3000 rpm
Peak Torque 58.9 lb ft (79.9 Nm)
Torque Measured @ 1800 rpm
Displacement 91 cu in (1.49 L)
Bore 3.3 in (84 mm)
Stroke 3.5 in (90 mm)
Aspiration Naturally aspirated
Emission Standards Stage IIIA

Weights

Operating Weight (with ROPS) 5800 lb (2630 kg)
Weight without ROPS 5670 lb (2570 kg)
Operating Weight at Front Drum 2760 lb (1250 kg)
Operating Weight at Rear Drum 3050 lb (1380 kg)

Service Refill Capacities

Fuel Tank Capacity 12.3 gal (46.5 L)
Cooling System Fluid Capacity 0.7 gal (2.6 L)
Engine Oil Capacity 1.6 gal (6 L)
Hydraulic System Fluid Capacity 8 gal (30 L)
Water Spray Tank Capacity 39 gal (150 L)
Ask a question