CAT CB334E Tandem Roller

Dimensions

Overall Length 123 in (3120 mm)
Overall Width 55 in (1390 mm)
Overall Height with ROPS 100 in (2560 mm)
Height (Steering Wheel) 72 in (1840 mm)
Wheelbase 91 in (2320 mm)
Ground Clearance 11 in (284 mm)
Curb Clearance 23.5 in (602 mm)
Turning Radius – Outside Drum Edge 169 in (4300 mm)
Turning Radius – Inside Drum Edge 118 in (3000 mm)

Drum

Drum Width 51 in (1300 mm)
Drum Diameter 31 in (800 mm)
Eccentric Weight Drive Hydraulic

Vibratory System

Frequency 4140 vpm (69 Hz)
Nominal Amplitude – High 0.01 in (0.37 mm)
Centrifugal Force Per Drum – Maximum 7448 lb (33.1 kN)
Vibration Selection Front, rear or both

Operating Specifications

Compaction Width 51 in (1300 mm)
Max Travel Speed 8 mph (12.5 km/h)
Operating Voltage 12 V
Alternator Supplied Amperage 65 amps

Engine Details

Number of Cylinders 4
Engine Make CAT
Engine Model Cat 3024C (C2.2)
Gross Power 45.8 hp (34.1 kw)
Net Power 44.3 hp (33 kw)
Power Measured @ 3000 rpm
Peak Torque 106.8 lb ft (144.8 Nm)
Torque Measured @ 1700 rpm
Displacement 135 cu in (2.21 L)
Bore 3.3 in (84 mm)
Stroke 3.9 in (100 mm)
Emission Standards Tier 4 Interim Stage IIIA

Weights

Operating Weight (with ROPS) 8688 lb (3940 kg)
Operating Weight at Front Drum 4278 lb (2000 kg)
Operating Weight at Rear Drum 4410 lb (1940 kg)

Service Refill Capacities

Fuel Tank Capacity 15 gal (57 L)
Cooling System Fluid Capacity 2.6 gal (10 L)
Engine Oil Capacity 2.9 gal (10.6 L)
Hydraulic System Fluid Capacity 12.7 gal (48 L)
Water Spray Tank Capacity 79 gal (300 L)
Ask a question