Case 410 Series III Skid Steer Loader


Dimensions

Length With Bucket 10.27 ft in (3130 mm)
Width Over Tires 4.93 ft in (1500 mm)
Ground Clearance 8.35 in (212 mm)
Height To Top Of Cab 6.57 ft in (2000 mm)
Wheelbase 3.45 ft in (1050 mm)
Length W/O Bucket 8.17 ft in (2490 mm)
Clearance At Max Lift And Dump 7.52 ft in (2290 mm)
Reach At Max Lift And Dump 23.63 in (600 mm)
Turning Radius From Center – Machine Rear 54 in (1371.6 mm)
Turning Radius From Center – Inc Bucket 73.41 in (1864.36 mm)

Engine Details

Number Of Cylinders 4
Engine Make Case
Engine Model 422T/M3 diesel Tier III certified
Gross Power 60.4 hp (45 kw)
Net Power 56.4 hp (42 kw)
Power Measured @ 2900 rpm
Aspiration Turbocharged
Displacement 134.3 cu in (2.2 L)

Operational Specs

Operational Weight 5430 lb (2463 kg)
Fuel Tank Capacity 22.1 gal (83.3 L)
Cooling System Fluid Capacity 3.1 gal (11.5 L)
Engine Oil Fluid Capacity 2.8 gal (10.5 L)
Max Speed 6.5 mph (10.5 km/h)
Hydraulic System Fluid Capacity 13.3 gal (50 L)
Chain Box Fluid Capacity – Each Side 2.1 gal (7.6 L)
Operating Speed 6.5 mph (10.5 km/h)
Tire Size 10.00 x 16.5 8 ply
Operating Voltage 12 V
Alternator Supplied Amperage 55 amps

Loader

Breakout Force 3751 lb (1701.5 kg)
Operating Load Rating 1501.4 lb (681 kg)
Tipping Angle 3000.5 degrees (3000.4912 degrees)
Bucket Capacity 0.5 yd3 (0.4 m3)

Hydraulic

Pump Type Gear
Pump Flow Capacity 19.5 gal/min (73.8 L/min)
Relief Valve Pressure 3050 psi (21029 kPa)
Ask a question