Case 430 Series III Skid Steer Loader


Dimensions

Length With Bucket 10.8 ft in (3290 mm)
Width Over Tires 4.93 ft in (1500 mm)
Ground Clearance 9.02 in (229 mm)
Height To Top Of Cab 6.67 ft in (2030 mm)
Wheelbase 3.52 ft in (1070 mm)
Length W/O Bucket 8.54 ft in (2600 mm)
Clearance At Max Lift And Dump 8.01 ft in (2440 mm)
Reach At Max Lift And Dump 22.84 in (580 mm)
Turning Radius From Center – Machine Rear 51.97 in (1320 mm)
Turning Radius From Center – Inc Bucket 76.78 in (1950 mm)

Engine Details

Number Of Cylinders 4
Engine Make Case
Engine Model 432T/M3 diesel Tier III certified
Gross Power 81.9 hp (61 kw)
Net Power 76.5 hp (57 kw)
Power Measured @ 2300 rpm
Aspiration Turbocharged
Displacement 195.3 cu in (3.2 L)

Operational Specs

Operational Weight 6799.1 lb (3084 kg)
Fuel Tank Capacity 22.1 gal (83.3 L)
Cooling System Fluid Capacity 3.1 gal (11.4 L)
Engine Oil Fluid Capacity 2.3 gal (8.5 L)
Max Speed 7 mph (11.2 km/h)
Hydraulic System Fluid Capacity 13.3 gal (50 L)
Chain Box Fluid Capacity – Each Side 2.1 gal (7.6 L)
Operating Speed 7 mph (11.2 km/h)
Tire Size 10.00 x 16.5 8 ply
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps

Loader

Breakout Force 4304 lb (1952.3 kg)
Operating Load Rating 1999.6 lb (907 kg)
Tipping Angle 3999.2 degrees (3999.1852 degrees)
Bucket Capacity 0.6 yd3 (0.5 m3)

Hydraulic

Pump Type Gear
Pump Flow Capacity 23.8 gal/min (90 L/min)
Relief Valve Pressure 3050 psi (21029 kPa)
Ask a question