Case 435 Series III Skid Steer Loader


Dimensions

Length With Bucket 10.96 ft in (3340 mm)
Width Over Tires 6.01 ft in (1830 mm)
Ground Clearance 9.3 in (236 mm)
Height To Top Of Cab 6.93 ft in (2110 mm)
Wheelbase 3.75 ft in (1140 mm)
Length W/O Bucket 8.7 ft in (2650 mm)
Clearance At Max Lift And Dump 7.65 ft in (2330 mm)
Reach At Max Lift And Dump 27.56 in (700 mm)
Turning Radius From Center – Machine Rear 53.15 in (1350 mm)
Turning Radius From Center – Inc Bucket 79.53 in (2020 mm)

Engine Details

Number Of Cylinders 4
Engine Make Case
Engine Model 432T/M3 diesel Tier III certified
Gross Power 81.9 hp (61 kw)
Net Power 76.5 hp (57 kw)
Power Measured @ 2300 rpm
Aspiration Turbocharged
Displacement 195.3 cu in (3.2 L)

Operational Specs

Operational Weight 6779.3 lb (3075 kg)
Fuel Tank Capacity 17.4 gal (65.5 L)
Cooling System Fluid Capacity 3.1 gal (11.4 L)
Engine Oil Fluid Capacity 2.3 gal (8.5 L)
Max Speed 7 mph (11.2 km/h)
Hydraulic System Fluid Capacity 11 gal (41.6 L)
Chain Box Fluid Capacity – Each Side 2.1 gal (7.6 L)
Operating Speed 7 mph (11.2 km/h)
Tire Size 12.00 x 16.5 10 ply
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps

Loader

Breakout Force 4400 lb (1995.9 kg)
Operating Load Rating 2200.3 lb (998 kg)
Tipping Angle 4398.3 degrees (4398.2218 degrees)
Bucket Capacity 0.6 yd3 (0.4 m3)

Hydraulic

Pump Type Gear
Pump Flow Capacity 23.8 gal/min (90 L/min)
Relief Valve Pressure 3050 psi (21029 kPa)
Ask a question