Case 440 Series III Skid Steer Loader


Dimensions

Length With Bucket 10.6 ft in (3230 mm)
Width Over Tires 5.35 ft in (1630 mm)
Ground Clearance 9.02 in (229 mm)
Height To Top Of Cab 6.67 ft in (2030 mm)
Wheelbase 3.61 ft in (1100 mm)
Length W/O Bucket 8.67 ft in (2640 mm)
Clearance At Max Lift And Dump 8.04 ft in (2450 mm)
Reach At Max Lift And Dump 21.26 in (540 mm)
Turning Radius From Center – Machine Rear 50.4 in (1280 mm)
Turning Radius From Center – Inc Bucket 76.78 in (1950 mm)

Engine Details

Number Of Cylinders 4
Engine Make Case
Engine Model 445T/M3 diesel Tier III certified
Gross Power 89.9 hp (67 kw)
Net Power 84.5 hp (63 kw)
Power Measured @ 2300 rpm
Aspiration Turbocharged
Displacement 274.7 cu in (4.5 L)

Operational Specs

Operational Weight 7039.4 lb (3193 kg)
Fuel Tank Capacity 22.1 gal (83.3 L)
Cooling System Fluid Capacity 3.1 gal (11.4 L)
Engine Oil Fluid Capacity 3.2 gal (12 L)
Max Speed 7 mph (11.2 km/h)
Hydraulic System Fluid Capacity 13.3 gal (50 L)
Chain Box Fluid Capacity – Each Side 2.1 gal (7.6 L)
Operating Speed 7 mph (11.2 km/h)
Tire Size 12.00 x 16.5 10 ply
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps

Loader

Breakout Force 4576 lb (2075.7 kg)
Operating Load Rating 2200.3 lb (998 kg)
Tipping Angle 4400.5 degrees (4400.4265 degrees)
Bucket Capacity 0.6 yd3 (0.5 m3)

Hydraulic

Pump Type Gear
Pump Flow Capacity 22 gal/min (83 L/min)
Relief Valve Pressure 3050 psi (21029 kPa)
Ask a question