Case 450 Series III Skid Steer Loader


Dimensions

Length With Bucket 11.72 ft in (3570 mm)
Width Over Tires 6.01 ft in (1830 mm)
Ground Clearance 9.22 in (234 mm)
Height To Top Of Cab 6.93 ft in (2110 mm)
Wheelbase 3.91 ft in (1190 mm)
Length W/O Bucket 9.16 ft in (2790 mm)
Clearance At Max Lift And Dump 7.88 ft in (2400 mm)
Reach At Max Lift And Dump 26.42 in (671 mm)
Turning Radius From Center – Machine Rear 53.15 in (1350 mm)
Turning Radius From Center – Inc Bucket 84.65 in (2150 mm)

Engine Details

Number Of Cylinders 4
Engine Make Case
Engine Model 445T/M3 diesel Tier III certified
Gross Power 89.9 hp (67 kw)
Net Power 83.2 hp (62 kw)
Power Measured @ 2300 rpm
Aspiration Turbocharged
Displacement 274.7 cu in (4.5 L)

Operational Specs

Operational Weight 8631.1 lb (3915 kg)
Fuel Tank Capacity 20.7 gal (78.3 L)
Cooling System Fluid Capacity 3.1 gal (11.4 L)
Engine Oil Fluid Capacity 3.2 gal (12 L)
Max Speed 6.3 mph (10 km/h)
Hydraulic System Fluid Capacity 17 gal (64.3 L)
Chain Box Fluid Capacity – Each Side 2.1 gal (7.6 L)
Operating Speed 6.3 mph (10 km/h)
Tire Size 12.00 x 16.5 10 ply
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps

Loader

Breakout Force 5689 lb (2580.5 kg)
Operating Load Rating 2449.4 lb (1111 kg)
Tipping Angle 4900.9 degrees (4900.8758 degrees)
Bucket Capacity 0.7 yd3 (0.5 m3)

Hydraulic

Pump Type Gear
Pump Flow Capacity 22 gal/min (83 L/min)
Relief Valve Pressure 3050 psi (21029 kPa)
Ask a question