Case SR200 Skid Steer Loader


Dimensions

Length With Bucket 10.83 ft in (3300 mm)
Width Over Tires 5.35 ft in (1630 mm)
Ground Clearance 8 in (203.2 mm)
Height To Top Of Cab 6.57 ft in (2000 mm)
Wheelbase 3.71 ft in (1130 mm)
Length W/O Bucket 8.76 ft in (2670 mm)
Clearance At Max Lift And Dump 8.21 ft in (2500 mm)
Reach At Max Lift And Dump 20.3 in (515.62 mm)
Turning Radius From Center – Machine Rear 62.9 in (1597.66 mm)
Turning Radius From Center – Inc Bucket 79.91 in (2029.46 mm)

Engine Details

Number Of Cylinders 4
Engine Make Case
Engine Model 432T/M3
Gross Power 74 hp (55.2 kw)
Net Power 70 hp (52.2 kw)
Power Measured @ 2500 rpm
Max Torque 203 lb ft (275.3 Nm)
Torque Measured @ 1400 rpm
Aspiration Turbocharged
Displacement 195 cu in (3.2 L)

Operational Specs

Operational Weight 6900 lb (3129.8 kg)
Fuel Tank Capacity 20 gal (75.8 L)
Engine Oil Fluid Capacity 2.7 gal (10 L)
Hydraulic System Fluid Capacity 5.3 gal (20 L)
Max Speed 11.9 mph (19.2 km/h)
Chain Box Fluid Capacity – Each Side 1.8 gal (6.7 L)
Operating Speed 7.2 mph (11.6 km/h)
Tire Size 10 x 12.5
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps

Loader

Operating Load Rating 2000 lb (907.2 kg)
Tipping Angle 4000 degrees
Bucket Capacity 0.6 yd3 (0.5 m3)
Bucket Width 66 in (1676.4 mm)

Hydraulic

Pump Type Gear
Pump Flow Capacity 8.2 gal/min (31 L/min)
Relief Valve Pressure 3000 psi (20684.3 kPa)
Ask a question