Case SR220 Skid Steer Loader


Dimensions

Length With Bucket 11.82 ft in (3600 mm)
Width Over Tires 5.91 ft in (1800 mm)
Ground Clearance 8 in (203.2 mm)
Height To Top Of Cab 6.57 ft in (2000 mm)
Wheelbase 4.27 ft in (1300 mm)
Length W/O Bucket 9.85 ft in (3000 mm)
Clearance At Max Lift And Dump 8.54 ft in (2600 mm)
Reach At Max Lift And Dump 19.5 in (495.3 mm)
Turning Radius From Center – Machine Rear 70.41 in (1788.16 mm)
Turning Radius From Center – Inc Bucket 84.2 in (2138.68 mm)

Engine Details

Number Of Cylinders 4
Engine Make Case
Engine Model 432T/M3
Gross Power 82 hp (61.2 kw)
Net Power 76 hp (56.7 kw)
Power Measured @ 2500 rpm
Max Torque 225 lb ft (305.1 Nm)
Torque Measured @ 1400 rpm
Aspiration Turbocharged
Displacement 195 cu in (3.2 L)

Operational Specs

Operational Weight 7400 lb (3356.6 kg)
Fuel Tank Capacity 25.5 gal (96.6 L)
Engine Oil Fluid Capacity 2.7 gal (10 L)
Hydraulic System Fluid Capacity 6 gal (22.4 L)
Max Speed 11.9 mph (19.2 km/h)
Chain Box Fluid Capacity – Each Side 2 gal (7.4 L)
Operating Speed 7.2 mph (11.6 km/h)
Tire Size 12 x 16.5
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps

Loader

Operating Load Rating 2200 lb (998 kg)
Tipping Angle 4400 degrees
Bucket Capacity 0.7 yd3 (0.5 m3)
Bucket Width 72 in (1828.8 mm)

Hydraulic

Pump Type Gear
Pump Flow Capacity 12.2 gal/min (46 L/min)
Relief Valve Pressure 3000 psi (20684.3 kPa)
Ask a question