CAT 216 Skid Steer Loader


Dimensions

Length With Bucket 10.88 ft in (3314 mm)
Width Over Tires 6.01 ft in (1829 mm)
Ground Clearance 7.7 in (195.58 mm)
Height To Top Of Cab 6.4 ft in (1950 mm)
Wheelbase 3.24 ft in (986 mm)
Length W/O Bucket 8.27 ft in (2519 mm)
Clearance At Max Lift And Dump 7.12 ft in (2168 mm)
Reach At Max Lift And Dump 21.5 in (546 mm)
Wheel Base 3.24 ft in (0.09 m)
Bucket Pin Height – Carry Position 9.31 in (236.22 mm)
Clearance At Maximum Lift And Dump 85.4 in (2169.16 mm)
Length – Without Bucket 99 in (2514.6 mm)
Bucket Pin Height – Maximum Lift 9.37 ft in (0.24 m)
Maximum Overall Height 146 in (3708.4 mm)
Height – Top Of Cab 6.42 ft in (0.17 m)
Bumper Overhang – Rear Axle 38 in (965.2 mm)
Reach – Maximum Lift/Dump 20 in (508 mm)
Turning Radius From Center – Inc Bucket 79.38 in (2016 mm)
Length – With Bucket On Ground 127 in (3225.8 mm)
Vehicle Width Over Tires 60 in (1524 mm)

Operating Specifications

Breakout Force – Tilt Cylinder 3612 lb (1638.38 kg)
Breakout Force – Lift Cylinder 2873 lb (1303.18 kg)
Rated Operating Capacity 1400 lb (635.03 kg)
Rated Operating Capacity With Optional Counterweight 1500 lb (680.39 kg)
Tipping Load 2800 lb (1270.06 kg)

Engine Details

Number Of Cylinders 4
Engine Make CAT
Engine Model 3024C
Gross Power 51 hp (38.1 kw)
Net Power 48 hp (35.8 kw)
Power Measured @ 3000 rpm
Displacement 134 cu in (2.2 L)
Bore 3.4 in (84.1 mm)
Stroke 4 in (100.1 mm)
Engine Model Cat 3024C
Net Flywheel Power 48 hp (35.8 kw)

Operational Specs

Operational Weight 5740 lb (2603.7 kg)
Fuel Tank Capacity 17.2 gal (65 L)
Max Speed 7 mph (11.3 km/h)
Hydraulic System Fluid Capacity 14.6 gal (55 L)
Operating Speed 7 mph (11.3 km/h)

Loader

Operating Load Rating 1400 lb (635.1 kg)
Tipping Angle 2600 degrees
Bucket Capacity 0.5 yd3 (0.4 m3)

Weights

Operating Weight 5490 lb (2490.3 kg)

Hydraulic

Pump Flow Capacity 15.2 gal/min (57.2 L/min)

Hydraulic System

Loader Hydraulic Pressure 3100 psi
Loader Hydraulic Flow 14.7 gal/min
Hydraulic Flow Standard flow

Service Refill Capacities

Cooling System 2.4 gal (9.1 L)
Fuel Tank Capacity 17 gal (64.4 L)
Hydraulic Tank 9.2 gal (34.9 L)
Engine Crankcase 2.1 gal (8 L)
Hydraulic System 14.5 gal (54.9 L)
Chain Box – Each Side 1.6 gal (6.1 L)

Cab

Rops SAE J1040 MAY94 and ISO3471:1994
Fops SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level Ii SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
Ask a question