CAT 232 Skid Steer Loader


Dimensions

Length With Bucket 11.28 ft in (3437 mm)
Width Over Tires 5.01 ft in (1525 mm)
Ground Clearance 5.7 in (144.78 mm)
Height To Top Of Cab 6.4 ft in (1950 mm)
Wheelbase 3.59 ft in (1094 mm)
Length W/O Bucket 9.06 ft in (2760 mm)
Clearance At Max Lift And Dump 7.62 ft in (2320 mm)
Reach At Max Lift And Dump 30.16 in (766 mm)
Wheel Base 3.59 ft in (0.1 m)
Bucket Pin Height – Carry Position 9.7 in (246.38 mm)
Clearance At Maximum Lift And Dump 86.9 in (2207.27 mm)
Length – Without Bucket 109.3 in (2776.22 mm)
Bucket Pin Height – Maximum Lift 9.89 ft in (0.26 m)
Maximum Overall Height 153.31 in (3893.82 mm)
Height – Top Of Cab 6.41 ft in (0.17 m)
Bumper Overhang – Rear Axle 38.9 in (988.06 mm)
Reach – Maximum Lift/Dump 28.5 in (723.9 mm)
Turning Radius From Center – Inc Bucket 88.71 in (2253 mm)
Length – With Bucket On Ground 135.31 in (3436.62 mm)
Vehicle Width Over Tires 60 in (1524 mm)

Operating Specifications

Breakout Force – Tilt Cylinder 4056 lb (1839.78 kg)
Breakout Force – Lift Cylinder 3814 lb (1730.01 kg)
Rated Operating Capacity 1750 lb (793.79 kg)
Rated Operating Capacity With Optional Counterweight 1795 lb (814.2 kg)
Tipping Load 3500 lb (1587.58 kg)

Engine Details

Number Of Cylinders 4
Engine Make CAT
Engine Model 3024C
Gross Power 51 hp (38.1 kw)
Net Power 48 hp (35.8 kw)
Power Measured @ 3000 rpm
Displacement 134 cu in (2.2 L)
Bore 3.4 in (84.1 mm)
Stroke 4 in (100.1 mm)
Engine Model Cat 3034C
Net Flywheel Power 48 hp (35.8 kw)

Operational Specs

Operational Weight 6931 lb (3143.9 kg)
Fuel Tank Capacity 17.2 gal (65 L)
Max Speed 6.2 mph (9.9 km/h)
Hydraulic System Fluid Capacity 14.6 gal (55 L)
Operating Speed 6.2 mph (9.9 km/h)

Loader

Operating Load Rating 1750 lb (793.8 kg)
Tipping Angle 3633 degrees
Bucket Capacity 0.6 yd3 (0.4 m3)

Weights

Operating Weight 6739.5 lb (3057 kg)

Hydraulic

Pump Flow Capacity 14.6 gal/min (55 L/min)

Hydraulic System

Loader Hydraulic Pressure 3100 psi
Loader Hydraulic Flow 14.7 gal/min

Service Refill Capacities

Cooling System 2.4 gal (9.1 L)
Fuel Tank Capacity 18.2 gal (68.9 L)
Hydraulic Tank 9.2 gal (34.9 L)
Engine Crankcase 2.1 gal (8 L)
Hydraulic System 15.3 gal (58 L)
Chain Box – Each Side 1.6 gal (6.1 L)

Cab

Rops SAE J1040 MAY94 and ISO3471:1994
Fops SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level Ii SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
Ask a question