Contents
Dimensions
| Ground Clearance | 0.73 ft in (220.98 mm) |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Bucket Pin Height – Carry Position | 7.9 in (200.66 mm) |
| Bucket Pin Height – Maximum Lift | 10.1 ft in (0.26 m) |
| Bucket Pin Reach – Maximum Lift | 7.2 in (182.88 mm) |
| Bumper Overhang – Behind Rear Axle | 40.21 in (1021.08 mm) |
| Clearance At Maximum Lift And Dump | 90 in (2286 mm) |
| Departure Angle | 27 degrees |
| Wheel Base | 3.63 ft in (0.1 m) |
| Reach – Maximum Lift/Dump | 21.7 in (551.18 mm) |
| Turning Radius From Center – Bucket | 83 in (2108.2 mm) |
| Turning Radius From Center – Coupler | 51.8 in (1315.72 mm) |
| Turning Radius From Center – Machine Rear | 64.5 in (1638.3 mm) |
| Vehicle Width Over Tires | 66 in (1676.4 mm) |
| Height – Top Of Cab | 6.93 ft in (0.18 m) |
| Length – With Bucket On Ground | 137.31 in (3487.42 mm) |
| Length – Without Bucket | 108.9 in (2766.06 mm) |
| Maximum Dump Angle | 52 degrees |
| Maximum Overall Height | 154.2 in (3916.68 mm) |
| Maximum Reach – With Arms Parallel To Ground | 49.2 in (1249.68 mm) |
| Rack Back Angle – Maximum Height | 87 degrees |
Operating Specifications
| Breakout Force – Tilt Cylinder | 5034 lb (2283.39 kg) |
| Rated Operating Capacity With Optional Counterweight | 2350 lb (1065.95 kg) |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Tipping Load | 4300 lb (1950.45 kg) |
| Rated Operating Capacity | 2150 lb (975.23 kg) |
Engine Details
| Displacement | 203 cu in (3.4 L) |
| Bore | 3.7 in (94 mm) |
| Stroke | 4.7 in (119.4 mm) |
| Net Power – Iso 9249 | 73.9 hp (55.2 kw) |
| Gross Power – Sae J1995 | 74.3 hp (55.5 kw) |
| Engine Model | Cat C3.3B DIT (turbo) |
| Net Power – Sae 1349 | 73.2 hp (54.6 kw) |
| Peak Torque – 1,500 Rpm – Sae J1995 | 195 lb ft (264.4 Nm) |
| Net Flywheel Power | 73.2 hp (54.6 kw) |
Power Train
| Travel Speed – Forward Or Reverse – One Speed | 7.5 mph (12.1 km/h) |
| Travel Speed – Forward Or Reverse – Two Speed Option | 11.5 mph (18.6 km/h) |
Weights
| Operating Weight | 6980 lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Hydraulic System
| Hydraulic Flow – Standard – Loader Hydraulic Pressure | 3335 psi |
| Hydraulic Flow – Standard – Loader Hydraulic Flow | 20 gal/min |
| Hydraulic Flow – Standard – Hydraulic Power (Calculated) | 39 hp (29.1 kw) |
| Hydraulic Flow – High Flow – Hydraulic Power (Calculated) | 58 hp (43.3 kw) |
| Hydraulic Flow – High Flow – Maximum Loader Hydraulic Pressure | 3335 psi |
| Hydraulic Flow – High Flow – Maximum Loader Hydraulic Flow | 30 gal/min |
Service Refill Capacities
| Cooling System | 3.7 gal (14.1 L) |
| Fuel Tank Capacity | 27.7 gal (104.9 L) |
| Hydraulic Tank | 10.3 gal (39 L) |
| Engine Crankcase | 3 gal (11.4 L) |
| Hydraulic System | 13.2 gal (50 L) |
| Chain Box – Each Side | 2.3 gal (8.8 L) |
Cab
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
| FOPS Level Ii | ISO 3449:2005 Level II |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Noise Level
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Inside Cab** | 83 dB(A) |
| Outside Cab*** | 101 dB(A) |
