CAT 248 Skid Steer Loader


Dimensions

Length With Bucket 11.54 ft in (3515 mm)
Width Over Tires 6.01 ft in (1829 mm)
Ground Clearance 9 in (228.6 mm)
Height To Top Of Cab 6.87 ft in (2092 mm)
Wheelbase 3.73 ft in (1134 mm)
Length W/O Bucket 9.19 ft in (2800 mm)
Clearance At Max Lift And Dump 7.87 ft in (2398 mm)
Reach At Max Lift And Dump 23.39 in (594 mm)
Wheel Base 3.73 ft in (0.1 m)
Bucket Pin Height – Carry Position 120 in (3048 mm)
Clearance At Maximum Lift And Dump 94 in (2387.6 mm)
Length – Without Bucket 110 in (2794 mm)
Bucket Pin Height – Maximum Lift 10.17 ft in (0.26 m)
Maximum Overall Height 156 in (3962.4 mm)
Height – Top Of Cab 6.75 ft in (0.18 m)
Bumper Overhang – Rear Axle 41 in (1041.41 mm)
Reach – Maximum Lift/Dump 21.3 in (541.02 mm)
Turning Radius From Center – Inc Bucket 86.5 in (2197 mm)
Length – With Bucket On Ground 138 in (3505.2 mm)
Vehicle Width Over Tires 66 in (1676.4 mm)

Operating Specifications

Breakout Force – Tilt Cylinder 5261 lb (2386.35 kg)
Breakout Force – Lift Cylinder 4308 lb (1954.08 kg)
Rated Operating Capacity 2000 lb (907.19 kg)
Rated Operating Capacity With Optional Counterweight 2100 lb (952.55 kg)
Tipping Load 4000 lb (1814.37 kg)

Engine Details

Number Of Cylinders 4
Engine Make CAT
Engine Model 3034T
Gross Power 80 hp (59.7 kw)
Net Power 74 hp (55.2 kw)
Power Measured @ 2600 rpm
Displacement 183 cu in (3 L)
Bore 3.9 in (97.1 mm)
Stroke 4 in (100.1 mm)
Engine Model Cat 3034C
Net Flywheel Power 55 hp (41.1 kw)

Operational Specs

Operational Weight 7530 lb (3415.6 kg)
Fuel Tank Capacity 23.8 gal (90 L)
Max Speed 7.6 mph (12.1 km/h)
Hydraulic System Fluid Capacity 14.1 gal (53 L)
Operating Speed 7.6 mph (12.1 km/h)

Loader

Operating Load Rating 2000 lb (907.2 kg)
Tipping Angle 3810 degrees
Bucket Capacity 0.6 yd3 (0.5 m3)

Weights

Operating Weight 7338 lb (3328.5 kg)

Hydraulic

Pump Flow Capacity 33.1 gal/min (125 L/min)

Hydraulic System

Loader Hydraulic Pressure 4200 psi
Loader Hydraulic Flow 33 gal/min
Hydraulic Flow Standard flow

Service Refill Capacities

Cooling System 2.6 gal (9.9 L)
Fuel Tank Capacity 23.8 gal (90.1 L)
Hydraulic Tank 9.2 gal (34.9 L)
Engine Crankcase 1.8 gal (6.9 L)
Hydraulic System 13.7 gal (51.9 L)
Chain Box – Each Side 2 gal (7.6 L)

Cab

Rops SAE J1040 MAY94 and ISO3471:1994
Fops SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level Ii SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
Ask a question