Contents
Dimensions
Length With Bucket | 11.87 ft in (3616 mm) |
Width Over Tires | 6.01 ft in (1829 mm) |
Ground Clearance | 9 in (228.6 mm) |
Height To Top Of Cab | 6.83 ft in (2080 mm) |
Wheelbase | 4.03 ft in (1228 mm) |
Length W/O Bucket | 9.55 ft in (2910 mm) |
Clearance At Max Lift And Dump | 7.99 ft in (2435 mm) |
Reach At Max Lift And Dump | 30.71 in (780 mm) |
Wheel Base | 4.03 ft in (0.11 m) |
Bucket Pin Height – Carry Position | 9.6 in (243.84 mm) |
Clearance At Maximum Lift And Dump | 98.2 in (2494.29 mm) |
Length – Without Bucket | 114.3 in (2903.22 mm) |
Bucket Pin Height – Maximum Lift | 10.65 ft in (0.28 m) |
Maximum Overall Height | 161 in (4089.4 mm) |
Height – Top Of Cab | 6.89 ft in (0.18 m) |
Bumper Overhang – Rear Axle | 41.1 in (1043.94 mm) |
Reach – Maximum Lift/Dump | 32.5 in (825.5 mm) |
Turning Radius From Center – Inc Bucket | 89.14 in (2264 mm) |
Length – With Bucket On Ground | 142.4 in (3616.96 mm) |
Vehicle Width Over Tires | 72 in (1828.8 mm) |
Operating Specifications
Breakout Force – Tilt Cylinder | 5212 lb (2364.13 kg) |
Breakout Force – Lift Cylinder | 5020 lb (2277.04 kg) |
Rated Operating Capacity | 2250 lb (1020.59 kg) |
Rated Operating Capacity With Optional Counterweight | 2300 lb (1043.27 kg) |
Tipping Load | 4500 lb (2041.17 kg) |
Engine Details
Number Of Cylinders | 4 |
Engine Make | CAT |
Engine Model | 3034 |
Gross Power | 63 hp (47 kw) |
Net Power | 59 hp (44 kw) |
Power Measured @ | 2600 rpm |
Displacement | 183 cu in (3 L) |
Bore | 3.9 in (97.1 mm) |
Stroke | 4 in (100.1 mm) |
Engine Model | Cat 3034C |
Net Flywheel Power | 59 hp (44 kw) |
Operational Specs
Operational Weight | 3535 lb (1603.5 kg) |
Fuel Tank Capacity | 23.8 gal (90 L) |
Max Speed | 7.6 mph (12.1 km/h) |
Hydraulic System Fluid Capacity | 14.1 gal (53 L) |
Operating Speed | 7.6 mph (12.1 km/h) |
Loader
Operating Load Rating | 2250 lb (1020.6 kg) |
Tipping Angle | 4733.3 degrees |
Bucket Capacity | 0.6 yd3 (0.5 m3) |
Weights
Operating Weight | 7615 lb (3454.2 kg) |
Hydraulic
Pump Flow Capacity | 22 gal/min (83 L/min) |
Hydraulic System
Loader Hydraulic Pressure | 3300 psi |
Loader Hydraulic Flow | 22 gal/min |
Hydraulic Flow | Standard flow |
Service Refill Capacities
Cooling System | 2.6 gal (9.9 L) |
Fuel Tank Capacity | 23.8 gal (90.1 L) |
Hydraulic Tank | 9.2 gal (34.9 L) |
Engine Crankcase | 1.8 gal (6.9 L) |
Hydraulic System | 14 gal (53 L) |
Chain Box – Each Side | 2.1 gal (8 L) |
Cab
Rops | SAE J1040 MAY94 and ISO3471:1994 |
Fops | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
Fops Level Ii | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |