Contents
Dimensions
| Ground Clearance | 0.74 ft in (223.52 mm) |
| Bucket Pin Height – Carry Position | 7.8 in (198.12 mm) |
| Bucket Pin Height – Maximum Lift | 10.61 ft in (0.27 m) |
| Bucket Pin Reach – Maximum Lift | 14.7 in (373.38 mm) |
| Bumper Overhang – Rear Axle | 42.8 in (1087.12 mm) |
| Clearance At Maximum Lift And Dump | 96.4 in (2448.56 mm) |
| Departure Angle | 26 degrees |
| Height – Top Of Cab | 6.9 ft in (0.18 m) |
| Length – With Bucket On Ground | 145.4 in (3693.16 mm) |
| Length – Without Bucket | 117.3 in (2979.42 mm) |
| Maximum Dump Angle | 50 degrees |
| Maximum Overall Height | 160.4 in (4074.16 mm) |
| Maximum Reach – With Arms Parallel | 50.5 in (1282.7 mm) |
| Rack Back Angle – Maximum Height | 85 degrees |
| Wheel Base | 4.07 ft in (0.11 m) |
| Turn Radius From Center – Bucket | 85.3 in (2166.62 mm) |
| Turn Radius From Center – Coupler | 54.6 in (1386.84 mm) |
| Turn Radius From Center – Rear | 68.1 in (1729.74 mm) |
| Vehicle Width Over Tires | 66 in (1676.4 mm) |
| Reach – Maximum Lift/Dump | 30.7 in (779.78 mm) |
Operating Specifications
| Rated Operating Capacity | 2700 lb (1224.7 kg) |
| Rated Operating Capacity With Optional Counterweight | 2945 lb (1335.83 kg) |
| Breakout Force – Tilt Cylinder | 7315 lb (3318.03 kg) |
| Tipping Load | 5400 lb (2449.4 kg) |
Engine Details
| Gross Power | 73 hp (54.5 kw) |
| Displacement | 201 cu in (3.3 L) |
| Bore | 3.7 in (94 mm) |
| Stroke | 4.7 in (119.4 mm) |
| Gross Power – Sae J1995 | 74 hp (55.2 kw) |
| Engine Model | Cat C3.4 DIT |
| Net Power – Sae 1349 | 73 hp (54.5 kw) |
| Net Flywheel Power | 73 hp (54.5 kw) |
Power Train
| Travel Speed Forward | 7.7 mph (12.4 km/h) |
| Travel Speed Reverse | 7.7 mph (12.4 km/h) |
| Travel Speed Reverse – 2-Speed Option | 12 mph (19.4 km/h) |
| Travel Speed Forward – 2-Speed Option | 12 mph (19.4 km/h) |
Weights
| Operating Weight | 7968 lb |
Hydraulic System
| Hydraulic Flow (1) | Standard |
| Hydraulic Power | 42.8 hp (32 kw) |
| Maximum Loader Hydraulic Flow | 33 gal/min |
| Maximum Loader Hydraulic Pressure | 4061 psi |
| Loader Hydraulic Pressure | 3335 psi |
| Loader Hydraulic Flow | 22 gal/min |
| Hydraulic Flow (2) | High Flow XPS |
Service Refill Capacities
| Cooling System | 3.7 gal (14.1 L) |
| Fuel Tank Capacity | 26 gal (98.5 L) |
| Hydraulic Tank | 11 gal (41.7 L) |
| Engine Crankcase | 2.6 gal (9.9 L) |
| Hydraulic System | 15 gal (56.8 L) |
| Chain Box – Each Side | 2.6 gal (9.9 L) |
Cab
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
