Contents
Dimensions
| Ground Clearance | 0.85 ft in (256.55 mm) |
| Bucket Pin Height – Carry Position | 7.7 in (195.58 mm) |
| Bucket Pin Height – Maximum Lift | 10.68 ft in (0.28 m) |
| Bucket Pin Reach – Maximum Lift | 14.9 in (378.46 mm) |
| Bumper Overhang – Rear Axle | 42.8 in (1087.12 mm) |
| Clearance At Maximum Lift And Dump | 97.2 in (2468.88 mm) |
| Departure Angle | 28 degrees |
| Wheel Base | 4.55 ft in (0.12 m) |
| Turn Radius From Center – Bucket | 90.8 in (2306.33 mm) |
| Turn Radius From Center – Coupler | 57.6 in (1463.04 mm) |
| Turn Radius From Center – Rear | 73.7 in (1871.98 mm) |
| Vehicle Width Over Tires | 76 in (1930.4 mm) |
| Height – Top Of Cab | 7.03 ft in (0.18 m) |
| Length – With Bucket On Ground | 151.81 in (3855.72 mm) |
| Length – Without Bucket | 123.5 in (3136.9 mm) |
| Maximum Dump Angle | 52 degrees |
| Maximum Overall Height | 161.4 in (4099.57 mm) |
| Maximum Reach – With Arms Parallel | 49.6 in (1259.84 mm) |
| Rack Back Angle – Maximum Height | 83 degrees |
| Reach – Maximum Lift/Dump | 30 in (762 mm) |
Operating Specifications
| Breakout Force – Tilt Cylinder | 7348 lb (3333 kg) |
| Tipping Load | 7400 lb (3356.59 kg) |
| Rated Operating Capacity | 3700 lb (1678.3 kg) |
| Breakout Force – Lift Cylinder | 6087 lb (2761.02 kg) |
Engine Details
| Gross Power | 110 hp (82.1 kw) |
| Displacement | 232 cu in (3.9 L) |
| Bore | 3.9 in (99.1 mm) |
| Stroke | 4.7 in (119.4 mm) |
| Gross Power – Sae J1995 | 110 hp (82.1 kw) |
| Engine Model | Cat C3.8 (turbocharged) |
| Net Power – Iso 9249 Eec | 107 hp (79.8 kw) |
| Net Power – Sae 1349 | 106 hp (79.1 kw) |
| Net Flywheel Power | 106 hp (79.1 kw) |
Power Train
| Travel Speed Forward | 7.2 mph (11.6 km/h) |
| Travel Speed Reverse | 7.2 mph (11.6 km/h) |
| Travel Speed Reverse – 2-Speed Option | 10.3 mph (16.6 km/h) |
| Travel Speed Forward – 2-Speed Option | 10.3 mph (16.6 km/h) |
Weights
| Operating Weight | 9137 lb |
Hydraulic System
| Hydraulic Flow (1) | Standard Flow Mode |
| Hydraulic Flow (2) | High Flow XHP |
| Loader Hydraulic Flow (1) | 23 gal/min |
| Loader Hydraulic Flow (2) | 40 gal/min |
| Loader Hydraulic Pressure (1) | 3335 psi |
| Hydraulic Power – Calculated (1) | 44 hp (32.9 kw) |
| Loader Hydraulic Pressure (2) | 4061 psi |
| Hydraulic Power – Calculated (2) | 94 hp (70.1 kw) |
Service Refill Capacities
| Cooling System | 4.1 gal (15.6 L) |
| Fuel Tank Capacity | 32.2 gal (121.9 L) |
| Hydraulic Tank | 10.3 gal (39 L) |
| Engine Crankcase | 3.5 gal (13.3 L) |
| Hydraulic System | 14.5 gal (54.9 L) |
| Chain Box – Each Side | 2.7 gal (10.3 L) |
Cab
| Rops | ISO 3471:2008 |
| Fops | ISO 3449:2005 Level I |
| Fops Level Ii | ISO 3449:2005 Level I |
