Contents
Dimensions
| Ground Clearance | 0.75 ft in (226.06 mm) |
| Wheel Base | 4.55 ft in (0.12 m) |
| Reach – Maximum Lift/Dump | 30.3 in (769.62 mm) |
| Roll Back Angle | 28 degrees |
| Turning Radius From Center – Bucket (Racked) | 89.8 in (2280.92 mm) |
| Turning Radius From Center – Coupler | 58.3 in (1480.82 mm) |
| Turning Radius From Center – Machine Rear | 74.7 in (1897.38 mm) |
| Vehicle Width Over Tires | 72 in (1828.8 mm) |
| Bucket Pin Height – Carry Position | 7.8 in (198.12 mm) |
| Bucket Pin Height – Maximum Lift | 10.6 ft in (0.27 m) |
| Bucket Pin Reach – Maximum Lift | 14.7 in (373.38 mm) |
| Bumper Overhang – Behind Rear Axle | 46.2 in (1173.48 mm) |
| Clearance At Maximum Lift And Dump | 96 in (2438.4 mm) |
| Departure Angle | 27 degrees |
| Height – Top Of Cab | 6.87 ft in (0.18 m) |
| Length – With Bucket On Ground | 155.7 in (3954.78 mm) |
| Length – Without Bucket | 127.6 in (3241.04 mm) |
| Maximum Dump Angle | 51 degrees |
| Maximum Overall Height | 160.1 in (4066.54 mm) |
| Maximum Reach – With Arms Parallel To Ground | 50.5 in (1282.7 mm) |
| Rack Back Angle – Maximum Height | 84 degrees |
Operating Specifications
| Breakout Force – Tilt Cylinder | 7443 lb (3376.09 kg) |
| Rated Operating Capacity | 3400 lb (1542.22 kg) |
| Breakout Force – Lift Cylinder | 6074 lb (2755.13 kg) |
| Rated Operating Capacity With Optional Counterweight | 3650 lb (1655.62 kg) |
| Tipping Load | 6800 lb (3084.43 kg) |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 880 CCA battery, 1829 mm (72 in) dirt bucket, no optional counterweights, Cat PC 12 16.5 tires and manual quick coupler (unless otherwise noted). |
Engine Details
| Displacement | 232 cu in (3.9 L) |
| Bore | 3.9 in (99.1 mm) |
| Stroke | 4.7 in (119.4 mm) |
| Net Power – Iso 9249 | 96 hp (71.6 kw) |
| Gross Power – Sae J1995 | 98 hp (73.1 kw) |
| Engine Model | Cat C3.8 DIT (turbo) |
| Net Power – Sae 1349 | 95 hp (70.9 kw) |
| Peak Torque – 1,500 Rpm – Sae J1995 | 246 lb ft (333.6 Nm) |
| Net Flywheel Power | 95 hp (70.9 kw) |
Power Train
| Travel Speed – Forward Or Reverse – One Speed | 6.6 mph (10.7 km/h) |
| Travel Speed – Forward Or Reverse – Two Speed Option | 9.4 mph (15.2 km/h) |
Weights
| Operating Weight | 8768 lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 880 CCA battery, 1829 mm (72 in) dirt bucket, no optional counterweights, Cat PC 12 16.5 tires and manual quick coupler (unless otherwise noted). |
Hydraulic System
| Hydraulic Flow – High Flow Xps – Hydraulic Power (Calculated) | 76 hp (56.7 kw) |
| Hydraulic Flow – Standard – Loader Hydraulic Pressure | 3335 psi |
| Hydraulic Flow – Standard – Loader Hydraulic Flow | 23 gal/min |
| Hydraulic Flow – Standard – Hydraulic Power (Calculated) | 44 hp (32.9 kw) |
| Hydraulic Flow – High Flow Xps – Maximum Loader Hydraulic Pressure | 4061 psi |
| Hydraulic Flow – High Flow Xps – Maximum Loader Hydraulic Flow | 32 gal/min |
Service Refill Capacities
| Cooling System | 4.1 gal (15.6 L) |
| Fuel Tank Capacity | 32.2 gal (121.9 L) |
| Hydraulic Tank | 10.3 gal (39 L) |
| Engine Crankcase | 3.5 gal (13.3 L) |
| Hydraulic System | 14.5 gal (54.9 L) |
| Diesel Exhaust Fluid (Def) Tank | 5 gal (19 L) |
| Chain Box – Each Side | 2.7 gal (10.3 L) |
Cab
| Rops | ISO 3471:2008 |
| Fops | ISO 3449:2005 Level I |
| Fops Level Ii | ISO 3449:2005 Level II |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Noise Level
| Inside Cab* | 83 dB(A) |
| Outside Cab** | 102 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
