CAT 272D2 XHP Skid Steer Loader


Dimensions

Ground Clearance 0.87 ft in (264.17 mm)
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, no optional counterweights, Cat PC 14 17.5 tires and manual quick coupler (unless otherwise noted).
Wheel Base 4.55 ft in (0.12 m)
Reach – Maximum Lift/Dump 29 in (736.6 mm)
Roll Back Angle 28 degrees
Turning Radius From Center – Bucket (Racked) 90.6 in (2301.24 mm)
Turning Radius From Center – Coupler 57.7 in (1465.58 mm)
Turning Radius From Center – Machine Rear 74.7 in (1897.38 mm)
Vehicle Width Over Tires 76 in (1930.4 mm)
Bucket Pin Height – Carry Position 9.31 in (236.22 mm)
Bucket Pin Height – Maximum Lift 10.72 ft in (0.28 m)
Bucket Pin Reach – Maximum Lift 13.5 in (342.9 mm)
Bumper Overhang – Behind Rear Axle 46.2 in (1173.48 mm)
Clearance At Maximum Lift And Dump 97.4 in (2473.96 mm)
Departure Angle 28 degrees
Height – Top Of Cab 7 ft in (0.18 m)
Length – With Bucket On Ground 155 in (3937 mm)
Length – Without Bucket 127 in (3225.8 mm)
Maximum Dump Angle 51 degrees
Maximum Overall Height 161.5 in (4102.11 mm)
Maximum Reach – With Arms Parallel To Ground 49.1 in (1247.15 mm)
Rack Back Angle – Maximum Height 84 degrees

Operating Specifications

Breakout Force – Tilt Cylinder 7362 lb (3339.35 kg)
Rated Operating Capacity 3650 lb (1655.62 kg)
Breakout Force – Lift Cylinder 6085 lb (2760.11 kg)
Rated Operating Capacity With Optional Counterweight 3900 lb (1769.02 kg)
Tipping Load 7300 lb (3311.23 kg)
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, no optional counterweights, Cat PC 14 17.5 tires and manual quick coupler (unless otherwise noted).

Engine Details

Displacement 232 cu in (3.9 L)
Bore 3.9 in (99.1 mm)
Stroke 4.7 in (119.4 mm)
Net Power – Iso 9249 107 hp (79.8 kw)
Gross Power – Sae J1995 110 hp (82.1 kw)
Engine Model Cat C3.8 DIT (turbo)
Net Power – Sae 1349 106 hp (79.1 kw)
Peak Torque – 1,500 Rpm – Sae J1995 276 lb ft (374.3 Nm)
Net Flywheel Power 106 hp (79.1 kw)

Power Train

Travel Speed – Forward Or Reverse – One Speed 7.2 mph (11.6 km/h)
Travel Speed – Forward Or Reverse – Two Speed 10.3 mph (16.6 km/h)

Weights

Operating Weight 9255 lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, no optional counterweights, Cat PC 14 17.5 tires and manual quick coupler (unless otherwise noted).

Hydraulic System

Hydraulic Flow – Xhp – Maximum Loader Hydraulic Flow* 40 gal/min
Note *When equipped with Cat 400 Series work tools.
Standard Flow Mode – Loader Hydraulic Pressure 3335 psi
Hydraulic Flow – Xhp – Maximum Loader Hydraulic Pressure 4061 psi
Hydraulic Flow – Xhp – Hydraulic Power (Calculated) 94 hp (70.1 kw)
Standard Flow Mode – Loader Hydraulic Flow 23 gal/min
Standard Flow Mode – Hydraulic Power – Calculated 44 hp (32.9 kw)

Service Refill Capacities

Cooling System 4.1 gal (15.6 L)
Fuel Tank Capacity 32.2 gal (121.9 L)
Hydraulic Tank 10.3 gal (39 L)
Engine Crankcase 3.5 gal (13.3 L)
Hydraulic System 14.5 gal (54.9 L)
Diesel Exhaust Fluid (Def) Tank 5 gal (19 L)
Chain Box – Each Side 2.7 gal (10.3 L)

Cab

Rops ISO 3471:2008
Fops ISO 3449:2005 Level I
Fops Level Ii ISO 3449:2005 Level II

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab** 83 dB(A)
Outside Cab*** 104 dB(A)
Ask a question