JCB 175 Skid Steer Loader


Dimensions

Ground Clearance 8.27 in (210 mm)
Wheelbase 3.52 ft in (1070 mm)
Dig Depth 393.71 in (10000 mm)
Dump Angle 42 degrees
Dump Height 7.42 ft in (2260 mm)
Loadover Height 9317.59 ft in (2840 m)
Max. Reach @ Full Height 3.97 ft in (1.21 m)
Overall Height 6.5 ft in (1980 mm)
Overall Length 137.41 in (3490 mm)
Pin Height 9.91 ft in (3.02 m)
Quick Hitch Turning Radius 3.75 ft in (1.14 m)
Reach @ Ground Level 3.55 ft in (1.08 m)
Rear Chassis Turning Radius 5.42 ft in (1.65 m)
Rollback – Ground Level 30 degrees
Angle Of Departure 25 degrees
Width Over Tyres 59.85 in (1520 mm)
Bucket Corner Turning Radius 6.86 ft in (2.09 m)

Tyres

Standard 10 x 16.5 – 8 PR Xtra Wall Off Road

Engine Details

Emission Standards EPA-T4F (EU St3B)
Fuel Diesel
Starter Motor 2 KW
Battery 12 V
Hydraulically Driven Cooling Fan Yes
Engine Oil Service Interval 500 hours
Engine Model Kohler KDI 1903TCR/26B
Gross Power 56 hp (41.8 kw)
Cooling System Diesel
Power Measured @ 2400 rpm
Max Torque 166 lb ft (225 Nm)
Torque Measured @ 1200 rpm
Aspiration Turbo
Displacement 1860 cu in (30.5 L)
Alternator 100 amps

Capacities

Fuel Tank – Diesel 24.4 gal (92 L)
Hydraulic System 11.5 gal (43.5 L)
Engine Oil 2 gal (7.4 L)
Engine Coolant 2.7 gal (10 L)

Operational Specs

Operational Weight 6818.9 lb (3093 kg)

Transmission

Model Single Speed
Travel Speed 7.5 mph (12 km/h)

Loader

Loader Lift Capacity With Bucket 3461.3 lb (1570 kg)
Tipping Load – No Counterweight 3505.4 lb (1590 kg)
Breakout Force 4717.9 lb (2140 kg)
Bucket Capacity 0.5 yd3 (0.4 m3)
Bucket Width 66.2 in (1680 mm)

Hydraulic

Pump Flow Capacity 18.5 gal/min (70 L/min)
Relief Valve Pressure 3335 psi (22994 kPa)
Ask a question