JCB 270 Skid Steer Loader


Dimensions

Ground Clearance 9.85 in (250 mm)
Wheelbase 4.11 ft in (1250 mm)
Dig Depth 393.71 in (10000 mm)
Dump Angle 42 degrees
Dump Height 7.55 ft in (2300 mm)
Loadover Height 9514.44 ft in (2900 m)
Max. Reach @ Full Height 4.27 ft in (1.3 m)
Overall Height 6.89 ft in (2100 mm)
Overall Length 152.76 in (3880 mm)
Pin Height 10.5 ft in (3.2 m)
Quick Hitch Turning Radius 4.93 ft in (1.5 m)
Reach @ Ground Level 3.61 ft in (1.11 m)
Rear Chassis Turning Radius 5.78 ft in (1.76 m)
Rollback – Ground Level 30 degrees
Angle Of Departure 29 degrees
Width Over Tyres 70.87 in (1800 mm)
Bucket Corner Turning Radius 7.55 ft in (2.3 m)

Tyres

Standard 12 x 16.5 – 10 PR Xtra Wall Off Road

Engine Details

Emission Standards EPA-T4F (EU St3B)
Fuel Diesel
Starter Motor 4.2 KW
Battery 12 V
Hydraulically Driven Cooling Fan Yes
Engine Oil Service Interval 500 hours
Engine Model EcoMAX TCAE-55
Gross Power 73.8 hp (55 kw)
Cooling System Diesel
Power Measured @ 2400 rpm
Max Torque 295.1 lb ft (400 Nm)
Torque Measured @ 1200 rpm
Aspiration Turbo
Displacement 4399 cu in (72.1 L)
Alternator 95 amps

Capacities

Fuel Tank Capacity 27.3 gal (103.3 L)
Hydraulic System 14.6 gal (55 L)
Engine Oil 4 gal (15 L)
Engine Coolant 5.9 gal (22 L)

Operational Specs

Operational Weight 8679.6 lb (3937 kg)

Transmission

Model Two Speed
Travel Speed 12 mph (19.4 km/h)

Loader

Loader Lift Capacity With Bucket 6056.1 lb (2747 kg)
Breakout Force 6543.4 lb (2968 kg)
Tipping Angle 5447.7 degrees (5447.6221 degrees)
Bucket Capacity 0.6 yd3 (0.5 m3)
Bucket Width 78.4 in (1990 mm)

Hydraulic

Pump Flow Capacity 23.8 gal/min (90 L/min)
Relief Valve Pressure 483.8 psi (3335 kPa)
Ask a question