JCB 300 Skid Steer Loader


Dimensions

Length With Bucket 12.41 ft in (3780 mm)
Width Over Tires 5.91 ft in (1800 mm)
Ground Clearance 9.85 in (250 mm)
Height To Top Of Cab 6.86 ft in (2090 mm)
Wheelbase 4.11 ft in (1250 mm)
Clearance At Max Lift And Dump 8.08 ft in (2460 mm)
Reach At Max Lift And Dump 35.44 in (900 mm)
Turning Radius From Center – Inc Bucket 86.62 in (2200 mm)
Turning Radius From Center – Machine Rear 69.3 in (1760 mm)
Loadover Height 9514.44 ft in (2900 m)
Dig Depth 393.71 in (10000 mm)
Dump Angle 42 degrees
Dump Height 7.55 ft in (2300 mm)
Angle Of Departure 29 degrees
Pin Height 10498.69 ft in (3200 m)
Rollback – Ground Level 30 degrees

Tyres

Standard 12 x 16.5 – 10 PR Xtra Wall Off Road

Engine Details

Emission Standards EPA-T4F (EU St3B)
Fuel Diesel
Starter Motor 4.2 KW
Battery 12 V
Engine Oil Service Interval 500 hours
Engine Make JCB
Engine Model EcoMAX TCAE-55
Gross Power 74 hp (55.2 kw)
Cooling System Liquid
Power Measured @ 2400 rpm
Max Torque 295.1 lb ft (400 Nm)
Torque Measured @ 1200 rpm
Aspiration Turbo
Displacement 268 cu in (4.4 L)

Operational Specs

Operational Weight 9288.1 lb (4213 kg)
Fuel Tank Capacity 27.3 gal (103 L)
Cooling System Fluid Capacity 4.1 gal (15.5 L)
Engine Oil Fluid Capacity 4 gal (15 L)
Hydraulic System Fluid Capacity 14.6 gal (55 L)
Max Speed 12.4 mph (20 km/h)
Chain Box Fluid Capacity – Each Side 6.1 gal (23 L)
Operating Speed 6.8 mph (11 km/h)
Tire Size 12 x 16.5
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps

Transmission

Model Two Speed
Travel Speed 12.5 mph (20 km/h)

Loader

Loader Lift Capacity With Bucket 6056.1 lb (2747 kg)
Breakout Force 6543.4 lb (2968 kg)
Operating Load Rating 3000 lb (1360.8 kg)
Tipping Angle 6369.2 degrees (6369.1543 degrees)
Bucket Capacity 0.6 yd3 (0.5 m3)
Bucket Width 74.9 in (1900 mm)

Hydraulic

Pump Flow Capacity 23.8 gal/min (90 L/min)
Relief Valve Pressure 3335 psi (22994 kPa)
Ask a question