JCB 330 Skid Steer Loader


Dimensions

Length With Bucket 12.47 ft in (3800 mm)
Width Over Tires 6.24 ft in (1900 mm)
Ground Clearance 9.06 in (230 mm)
Height To Top Of Cab 6.83 ft in (2080 mm)
Wheelbase 6.93 ft in (2110 mm)
Clearance At Max Lift And Dump 8.17 ft in (2490 mm)
Reach At Max Lift And Dump 35.44 in (900 mm)
Rollback – Ground Level 30 degrees
Turning Radius From Center – Inc Bucket 86.62 in (2200 mm)
Turning Radius From Center – Machine Rear 69.3 in (1760 mm)
Angle Of Departure 29 degrees
Dump Angle 42 degrees

Tyres

Standard 14 x 17.5 – 12 PR Xtra Wall Off Road

Engine Details

Engine Oil Service Interval 500 hours
Engine Make JCB
Engine Model TC-68
Gross Power 92 hp (68.7 kw)
Power Measured @ 2400 rpm
Max Torque 301 lb ft (408.2 Nm)
Torque Measured @ 1800 rpm
Aspiration Turbocharged
Displacement 268 cu in (4.4 L)

Operational Specs

Operational Weight 9735.7 lb (4416 kg)
Fuel Tank Capacity 27.3 gal (103 L)
Cooling System Fluid Capacity 4.1 gal (15.5 L)
Engine Oil Fluid Capacity 4 gal (15 L)
Hydraulic System Fluid Capacity 14.6 gal (55 L)
Max Speed 13.5 mph (21.8 km/h)
Chain Box Fluid Capacity – Each Side 6.1 gal (23 L)
Operating Speed 7.3 mph (11.8 km/h)
Tire Size 12 x 16.5
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps

Transmission

Model Two Speed
Travel Speed 12.5 mph (20 km/h)

Loader

Loader Lift Capacity With Bucket 6056.1 lb (2747 kg)
Breakout Force 6543.4 lb (2968 kg)
Operating Load Rating 3295 lb (1494.6 kg)
Tipping Angle 6589.7 degrees (6589.6166 degrees)
Bucket Capacity 0.6 yd3 (0.5 m3)
Bucket Width 74.9 in (1900 mm)

Hydraulic

Pump Flow Capacity 23.8 gal/min (90 L/min)
Relief Valve Pressure 3335 psi (22994 kPa)
Ask a question