New Holland L228 Skid Steer Loader


Dimensions

Ground Clearance 8 in (203 mm)
Wheelbase 4.34 ft in (1322 mm)
Bucket Hinge Pin 129.41 in (3287 mm)
Dump Angle 54.7 degrees
Angle Of Departure 23.5 degrees
Rollback, Bucket At Full Height 84.8 degrees
Rollback, Bucket On Ground 33.8 degrees
Top Of Rops 78.82 in (2002 mm)
Overall Width 5.81 ft in (1768 mm)
Bottom Of Level Bucket, Fully Raised 122.64 in (3115 mm)

Engine Details

Air Intake Turbocharged Aftercooled with external EGR
Fuel Injection HPCR Direct
Horsepower Per Sae J1349 Net 68 hp (50.8 kw)
Horsepower Per Sae J1349 Gross 74 hp (55.2 kw)
Engine Model F5H FL463A*F001
Rated Speed 2500 rpm
Peak Torque 231.6 lb ft (314 Nm)
Displacement 207.5 cu in (3.4 L)
Bore 3.9 in (99 mm)
Stroke 4.4 in (110 mm)

Capacities

Engine Oil With Filter 2.3 gal (8.5 L)
Chain Tanks 5.9 gal (22.2 L)
Fuel Tank Capacity 25.5 gal (96.5 L)

Performance

Tipping Load 5599.8 lb (2540 kg)
Operating Weight 8245.3 lb (3740 kg)
Breakout Force, Bucket Cylinder 8610.2 lb (38.3 kN)
Breakout Force, Lift Cylinder 6137.3 lb (27.3 kN)
Rated Operating Load, 50% Tip 2799.9 lb (1270 kg)

Power Train

Travel Speed, Low Range 7 mph (11.3 km/h)
Travel Speed, High Range 10.5 mph (16.9 km/h)

Weights

Operating Weight 8245.3 lb (3740 kg)
Shipping 7561.9 lb (3430 kg)

Hydraulic System

Standard Pump Flow 24.2 gal/min (91.7 L/min)
Optional High Flow 37.6 gal/min (142.4 L/min)
Relief Valve Pressure 3046 psi (21001.5 kPa)
Ask a question