John Deere 548E Skidder

Dimensions

Overall Length 20.77 in (6330 mm)
Overall Width 9.85 ft in (3000 mm)
Height To Top Of Cab 9.88 ft in (3010 mm)
Ground Clearance 1.69 ft in (514 mm)
Wheelbase 9.59 ft in (2920 mm)
Max Height Of Boom 9.85 ft in (3000 mm)
Reach Of Grapple At Ground Level 6.47 ft in (1970 mm)
Tong Opening At Tips 6.25 ft in (1905 mm)
Height Of Grapple From Ground 2.84 ft in (864 mm)
Max Line Pull – Bare Drum 38126 lb (171 kN)
Max Line Speed 146 ft/min (44.5 m/min)
Grapple Capacity – Tongs Tip To Tip 7.97 ft2 (0.74 m2)
Drum Diameter 8 in (203.2 mm)
Drum Capacity At Cable Width 254 ft in (77.41 m)
Max Blade Height 47.64 in (1210 mm)
Cable Width 0.63 in (15.8 mm)

Engine Details

Number Of Cylinders 6
Engine Make John Deere
Engine Model 6059T
Gross Power 121 hp (90 kw)
Net Power 115 hp (86 kw)
Power Measured @ 2200 rpm
Peak Torque 391 lb ft (530 Nm)
Torque Measured @ 1350 rpm
Displacement 359 cu in (5.9 L)
Aspiration Turbocharged

Operational Specs

Operating Weight 22801 lb (10342 kg)
Fuel Tank Capacity 41.5 gal (157 L)
Cooling System Fluid Capacity 6.5 gal (24.6 L)
Engine Oil Capacity 5 gal (18.9 L)
Front Diff Fluid Capacity 4.5 gal (17 L)
Rear Diff Fluid Capacity 4.5 gal (17 L)
Transmission Fluid Capacity 7.8 gal (29.3 L)
Hydraulic System Fluid Capacity 8 gal (30.3 L)
Operational Voltage 12 V
Alternator Supplied Amperage 95 amps
Steering Angle 90 degrees
Tire Size 28L-26

Transmission

Transmission Type direct-drive power shift
Number Of Forward Gears 8
Number Of Reverse Gears 4
Max Speed – Forward 16.6 mph (26.7 km/h)
Max Speed – Reverse 6 mph (9.6 km/h)

Hydraulic

Pump Type axial-piston, pressure-compensated
Pump Flow 27 gal/min (102 L/min)
Relief Valve Pressure 3000 psi (20684 kPa)
Ask a question