John Deere 548G Series II Skidder


Dimensions

Overall Length 20.75 in (6330 mm)
Overall Width 9.83 ft in (3000 mm)
Height To Top Of Cab 9.89 ft in (3010 mm)
Ground Clearance 1.69 ft in (514 mm)
Wheelbase 9.58 ft in (2920 mm)
Max Height Of Boom 9.83 ft in (2991 mm)
Reach Of Grapple At Ground Level 6.47 ft in (1970 mm)
Tong Opening At Tips 7.09 ft in (2160 mm)
Height Of Grapple From Ground 2.83 ft in (864 mm)
Max Line Pull – Bare Drum 40465.61 lb (180 kN)
Max Line Speed 131.24 ft/min (40 m/min)
Grapple Capacity – Tongs Tip To Tip 8.08 ft2 (0.75 m2)
Drum Diameter 8 in (203.2 mm)
Drum Capacity At Cable Width 254 ft in (77.42 m)
Max Blade Height 47.4 in (1210 mm)
Cable Width 0.63 in (15.8 mm)

Engine Details

Number Of Cylinders 6
Engine Make John Deere
Engine Model 6068T
Gross Power 127 hp (95 kw)
Net Power 119 hp (89 kw)
Power Measured @ 2200 rpm
Peak Torque 398 lb ft (537 Nm)
Torque Measured @ 1400 rpm
Displacement 414 cu in (6.8 L)
Aspiration Turbocharged

Operational Specs

Operating Weight 21740 lb (9861 kg)
Fuel Tank Capacity 50 gal (189 L)
Cooling System Fluid Capacity 6.5 gal (24.6 L)
Engine Oil Capacity 5 gal (18.9 L)
Front Diff Fluid Capacity 4.5 gal (17 L)
Rear Diff Fluid Capacity 4.5 gal (17 L)
Transmission Fluid Capacity 7.8 gal (29.3 L)
Hydraulic System Fluid Capacity 8.1 gal (30.3 L)
Operational Voltage 12 V
Alternator Supplied Amperage 65 amps
Axle Oscillation 30 degrees
Steering Angle 90 degrees
Tire Size 28L-26

Transmission

Transmission Type direct-drive power shift
Number Of Forward Gears 8
Number Of Reverse Gears 7
Max Speed – Forward 12.1 mph (19.5 km/h)
Max Speed – Reverse 9.1 mph (14.7 km/h)

Hydraulic

Pump Type variable-displacement axial piston
Pump Flow 27 gal/min (102 L/min)
Relief Valve Pressure 3000 psi (20684 kPa)
Ask a question