John Deere 748E Skidder

Dimensions

Overall Length 25.66 in (7820 mm)
Overall Width 10.63 ft in (3240 mm)
Height To Top Of Cab 10.25 ft in (3130 mm)
Ground Clearance 1.97 ft in (599 mm)
Wheelbase 12.09 ft in (3683 mm)
Max Height Of Boom 12.42 ft in (3780 mm)
Reach Of Grapple At Ground Level 7.35 ft in (2240 mm)
Tong Opening At Tips 10 in (3048 mm)
Height Of Grapple From Ground 2.84 ft in (863 mm)
Max Line Speed 145 ft/min (44.2 m/min)
Grapple Capacity – Tongs Tip To Tip 11.52 ft2 (1.07 m2)
Max Blade Height 59.06 in (1500 mm)
Drum Capacity At Cable Width 263 ft in (80.2 m)
Cable Width 0.75 in (19.11 mm)
Max Line Pull – Bare Drum 46861 lb (208 kN)

Engine Details

Number Of Cylinders 6
Engine Make John Deere
Engine Model 6076T
Gross Power 173 hp (129 kw)
Net Power 165 hp (123 kw)
Power Measured @ 2200 rpm
Peak Torque 532 lb ft (721 Nm)
Torque Measured @ 1350 rpm
Displacement 466 cu in (7.7 L)
Aspiration Turbocharged

Operational Specs

Operating Weight 33400 lb (15150 kg)
Fuel Tank Capacity 62 gal (234.7 L)
Cooling System Fluid Capacity 7.5 gal (28.4 L)
Engine Oil Capacity 6.3 gal (23.7 L)
Front Diff Fluid Capacity 7.5 gal (28.4 L)
Rear Diff Fluid Capacity 7.5 gal (28.4 L)
Transmission Fluid Capacity 7.8 gal (29.3 L)
Hydraulic System Fluid Capacity 11 gal (41.6 L)
Operational Voltage 12 V
Alternator Supplied Amperage 78 amps
Steering Angle 90 degrees
Tire Size 30.5-32 12 PR LS2

Transmission

Transmission Type powershift
Number Of Forward Gears 8
Number Of Reverse Gears 4
Max Speed – Forward 18.8 mph (30.3 km/h)
Max Speed – Reverse 6.8 mph (10.9 km/h)

Hydraulic

Pump Type axial-piston, pressure-compensated
Pump Flow 38 gal/min (143.8 L/min)
Relief Valve Pressure 3000 psi (20684 kPa)
Ask a question