Contents
Engine Details
| Engine Model | Cat C4.4 ACERT* |
| Note | *Meets U.S. EPA Tier 4 Final emission standards. |
| Gross Power – Basic | 142.1 hp (106 kw) |
Operational Specs
| Operating Weight | 34361 lb (15585.9 kg) |
Tires
| Standard | 400/75-28 Duraforce |
| Optional | 400/75-28 Foam Filled; 14.00-24 Solid; 17.5 25 16PR; 17.5 25 12PR Foam Filled |
Hydraulic System
| Auxiliary Hydraulic Flow | 25 gal/min |
| Pump Type | Variable displacement load sensing axial piston pump |
| Note | Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. |
| Auxiliary Hydraulic Pressure | 3307 psi |
Axles
| Types (1) | Trunnion mounted planetary 55 degree steer axles. |
| Types (2) | High bias limited slip differential on front axle. |
Hydraulic System
| System Operating Pressure | 3771 psi |
Brakes
| Service Brakes | Inboard wet disc brakes on front and rear axles |
| Parking Brakes | Wet disc, spring applied hydraulic release on front axle |
Operating Specifications
| Rated Load Capacity | 12000 lb (5443.2 kg) |
| Maximum Lift Height | 54.6 ft in (16.7 m) |
| Maximum Forward Reach | 42 ft in (12.9 m) |
| Top Travel Speed | 20.5 mph (33 km/h) |
| Capacity At Maximum Height (O/R Down) | 5000 lb (2268 kg) |
| Capacity At Maximum Reach (O/R Down) | 3500 lb (1587.6 kg) |
| Frame Leveling | 10 degrees |
| Turning Radius – Over Tires | 14 ft in (4.3 m) |
| Drawbar Pull – Loaded | 25605 lb ft (34715.8 Nm) |
| Maximum Lift Height (O/R Down) | 54.6 ft in (16.7 m) |
Service Refill Capacities
| Fuel Tank Capacity | 38 gal (143.9 L) |
| Hydraulic System | 50 gal (189.3 L) |
| Diesel Exhaust Fluid (Def) Tank | 5.7 gal (21.6 L) |
Boom Performance
| Boom Up | 16.7 s |
| Boom Down | 14.4 s |
| Tele In | 16.3 s |
| Tele Out | 18.5 s |
Transmission Speeds
| Forward | 4 speed |
| Reverse | 3 speed |
Work Tools
| Hydraulic It Coupler | Includes Auxiliary Electrics |
| Pallet Forks – Option 1 | [2] 1525 mm, 60 mm 150 mm ([2] 60 in, 2.36 in 6 in) |
| Pallet Forks – Option 2 | [2] 1220 mm, 60 mm 125 mm ([2] 48 in, 2.36 in 5 in) |
| Cubing Forks | [2] 1220 mm, 50 mm 50 mm ([2] 48 in, 2 in 2 in) |
| Carriages – Standard Tilt | 50 in (1270 mm) |
| Carriages – Wide Tilt | 72 in (1828.8 mm) |
| Carriages – Side Shift | 48 in (1219.2 mm) |
| Carriages – Standard Rotate | 50 in (1270 mm) |
| Carriages – Wide Rotate | 72 in (1828.8 mm) |
| Fork Extensions* | 90 in (2286 mm) |
| Carriages – Dual Positioning | 50 in (1270 mm) |
| Note | *For use with 1829 mm (72 in) Lumber Forks. |
| Lumber Forks | [2] 1829 mm, 50 mm 150 mm ([2] 72 in, 2 in 6 in) |
| Carriages – Swing (1) | 100 degrees, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100 degrees, 72 in, 10,000 lb Capacity, 5,000 lb Swung) |
| Carriages – Swing (2) | 180 degrees, 1824 mm, 5443 kg (180 degrees, 72 in, 12,000 lb) |
