Contents
Engine Details
| Engine Model | Cat C3.4B |
| Note | Meets U.S. EPA Tier 4 Final emission standards. |
| Gross Power – Basic | 100 hp (74.6 kw) |
Operational Specs
| Operating Weight | 22928 lb (10400 kg) |
Tires
| Standard | 370/75-28 Air Duraforce |
| Optional (4) | 13.00 24 Solid |
| Optional (2) | 13.00 24-16 PR Air |
| Optional (3) | 13.00 24-12 PR Foam Filled |
| Optional (1) | 370/75-28 Foam Duraforce |
Hydraulic System
| Auxiliary Hydraulic Flow | 18 gal/min |
| Note | Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. |
| Auxiliary Hydraulic Pressure | 3481 psi |
| System Operating Pressure | 3770 psi |
Axles
| Type (2) | High bias limited slip differential on front axle |
| Type (1) | Trunnion mounted planetary 55 degree steer axles |
Hydraulic System
| Gear Pump | Single-section |
Brakes
| Service Brakes | Inboard wet disc brakes on front and rear axles |
| Parking Brakes | Wet disc, spring applied hydraulic release on front axle |
Operating Specifications
| Rated Load Capacity | 6500 lb (2948.4 kg) |
| Maximum Lift Height | 42 ft in (12.9 m) |
| Maximum Forward Reach | 30 ft in (9.2 m) |
| Top Travel Speed | 20 mph (32.2 km/h) |
| Capacity At Maximum Height (O/R Down) | 6500 lb (2948.4 kg) |
| Capacity At Maximum Reach (O/R Down) | 1700 lb (771.2 kg) |
| Frame Leveling | 10 degrees |
| Turning Radius – Over Tires | 12 ft in (3.7 m) |
| Drawbar Pull – Loaded | 19783 lb ft (26822.2 Nm) |
| Capacity At Maximum Height (O/R Up) | 6000 lb (2721.6 kg) |
| Capacity At Maximum Reach (O/R Up) | 600 lb (272.2 kg) |
Service Refill Capacities
| Fuel Tank Capacity | 38.3 gal (145 L) |
| Hydraulic System | 42 gal (159 L) |
| Diesel Exhaust Fluid (Def) Tank | 5.7 gal (21.6 L) |
Boom Performance
| Boom Up | 15.5 s |
| Boom Down | 10.7 s |
| Tele In | 11.8 s |
| Tele Out | 17 s |
Transmission Speeds
| Forward | 4 speed |
| Reverse | 3 speed |
Work Tools
| Hydraulic It Coupler | Includes Auxiliary Electrics |
| Pallet Forks – Option 1 | [2] 1220 mm, 60 mm 125 mm ([2] 48 in, 2.36 in 5 in) |
| Pallet Forks – Option 2 | [2] 1220 mm, 60 mm 100 mm ([2] 48 in, 2.36 in 4 in) |
| Lumber Forks – Option 1 | [2] 1525 mm, 45 mm 180 mm ([2] 60 in, 1.75 in 7 in) |
| Lumber Forks – Option 2 | [2] 1829 mm, 50 mm 150 mm ([2] 72 in, 2 in 6 in) |
| Cubing Forks | [2] 1220 mm, 50 mm 50 mm ([2] 48 in, 2 in 2 in) |
| Carriages – Standard Tilt | 50 in (1270 mm) |
| Carriages – Wide Tilt | 72 in (1828.8 mm) |
| Carriages – Side Shift | 48 in (1219.2 mm) |
| Carriages – Standard Rotate | 50 in (1270 mm) |
| Carriages – Wide Rotate | 72 in (1828.8 mm) |
| Carriages – Swing | 100 degrees, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100 degrees, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
| Pallet Forks – Option 3 | [2] 1525 mm, 60 mm 150 mm ([2] 60 in, 2.36 in 6 in) |
| Carriages – Dual Fork Positioning | 50 in (1270 mm) |
