JCB 520-40 Telehandler

Dimensions

Length To Fork Face 11.09 ft in (3380 mm)
Ground Clearance 0.89 ft in (270 mm)
Width Over Tires 5.12 ft in (1560 mm)
Overall Height 6.47 ft in (1970 mm)
Wheelbase 6.24 ft in (1900 mm)
Turning Radius Outside Tires 10.86 ft in (3310 mm)
Weight 9700.34 lb (4400 kg)

Lift

Max Lift Height 13.24 ft in (4035 mm)
Max Forward Reach 8.5 ft in (2590 mm)
Max Load At Max Reach 2000 lb (907.19 kg)
Max Load At Max Height 890 lb (403.7 kg)
Max Lift Capacity 4000 lb (1814.37 kg)

Electrical System

Battery Capacity 75 AH
Alternator 65 amps
Voltage 12 V V

Engine Details

Emission Standards EC Stage IIIA/USA EPA Tier 3
Fuel Diese
Engine Oil Service Interval Hours 500
Number Of Cylinders 4
Engine Make Perkins
Engine Model Perkins Diesel 404D-22
Gross Power 50 hp (37.3 kw)
Cooling System Liquid
Power Measured @ 2800 rpm
Max Torque 104 lb ft (141.1 Nm)
Torque Measured @ 2000 rpm
Displacement 134.3 cu in (2.2 L)
Bore 3.4 in (84 mm)
Stroke 4 in (100 mm)
Aspiration Naturally aspirated

Capacities

Coolant (Engine) 2.2 gal (8 L)
Fuel Tank Capacity 16.2 gal (61 L)
Hydraulic Tank 8.8 gal (33 L)

Operational Specs

Operating Weight 9700 lb (4399.9 kg)
Fuel Tank Capacity 16 gal (60.6 L)
Hydraulic System Fluid Capacity 8.7 gal (33 L)
Operating Voltage 12 V
Alternator Supplied Amperage 55 amps
Tire Size 10.00 x 165 12 ply Tires

Transmission

Lift Capacity To Full Height 4409.3 lb (2000 kg)
Lift Capacity At Full Reach 2204.7 lb (1000 kg)
Transmission Type Hydrostatic 2 speed transmission
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed – Forward 12.5 mph (20 km/h)
Max Speed – Reverse 12.5 mph (20 km/h)

Hydraulic System

Retract 4 sec
Extend 5.7 sec
Bucket Crowd 3.2 sec
Max Operating Pressure 250 bar

Hydraulic

Pump Flow Capacity 22 gal/min (83.3 L/min)
Relief Valve Pressure 3626 psi (25000.4 kPa)

Hydraulic System

Raise Time 5.8 sec
Dump Time 3.7 sec
Lower Time 4 sec
Ask a question