Dimensions
Overall Length |
128.2 in (3250 mm) |
Wheelbase |
71.5 in (1816 mm) |
Overall Width (with R1 tires) |
65.6 in (1660 mm) |
Overall Width (with R4 tires) |
91.9 in (2330 mm) |
Height (To Hood) |
62 in (1570 mm) |
Height (ROPS) |
97.2 in (2460 mm) |

Operational Specs
Operating Weight |
3850 lb (1746 kg) |
Max Drawbar |
1103 lb (500 kg) |
Operating Voltage |
12 V |
Alternator |
75 amps |
Battery |
12 V, CCA 770 |
Turning Radius |
9.2 ft in (2800 mm) |
Front Tire Size (2WD/4WD) |
8.00-16 R1 / R4 |
Rear Tire Size (2WD/4WD) |
13.6-28 R1 / R4 |
Engine Details
Number Of Cylinders |
4 |
Engine Make |
John Deere |
Engine Model |
John Deere 4024T PowerTech |
Displacement |
146 cu in (2.4 L) |
Bore |
3.39 in (86 mm) |
Stroke |
4.13 in (105 mm) |
Gross Power |
48 hp (35.8 kw) |
PTO Power |
40.5 hp (30.3 kw) |
Power Measured @ |
2400 rpm |
Max Torque |
127 lb ft (172 Nm) |
Torque Measured @ |
1440 rpm |
Aspiration |
Turbocharged |
Emission Standards |
US EPA Tier 2 |
Transmission
Model |
PowrReverser |
eHydro |
Type |
Hydraulic power shuttle transmission |
Hydrostatic transmission |
Number Of Gears |
12F / 12R |
Infinite 3-range forward and reverse |
Max Travel Speed |
17.3 mph (27.8 km/h) |
16.9 mph (27.2 km/h) |

Power Take-off (PTO)
Rear PTO Type |
Independent |
Rear PTO Speed |
540 rpm |
Mid PTO Type (Optional) |
independent |
Mid PTO Speed (Optional) |
2100 rpm |

Hydraulic System
Type |
Open center hydraulics |
Relief Valve Setting |
2500 psi (17240 kPa) |
Total Flow |
17.1 gal/min (64.6 L/min) |
Main Pump Flow |
12.0 gal/min (45.4 L/min) |
Steering Pump Flow |
5.1 gal/min (19.3 L/min) |
Number Of Remote Control Valves |
5 |
3 Point Hitch Type |
Cat I |
3 Point Hitch Lift Capacity @ 24 Inches |
2500 lb (1134 kg) |

John Deere 4320 Filters
Fuel Filter |
RE508202 |
Air Filter (Primary) |
AP33330 |
Air Filter (Secondary) |
AP33331 |
Engine Oil Filter |
RE519626 |
Transmission / Hydraulic Filter |
LVA13038 |
Cab Recirculation Air Filter |
2x MIU10011 |
Cab Fresh Aid Filter |
MIU10010 |
JD 4320 Filter Pak |
LVA21203 (RE519626, AP33330, RE508202, LVA13038) |

Service Refill Capacities
Fuel Tank Capacity |
14.6 gal (54.9 L) |
Cooling System Capacity |
1.6 gal (6.2 L) |
Engine Oil Capacity |
1.9 gal (7.5 L) |
Transmission and Hydraulic System (PowrReverser Models) |
10.3 gal (38.9 L) |
Transmission and Hydraulic System (eHydro Models) |
9.6 gal (36.1 L) |
Front Axle Fluid Capacity |
1.3 gal (5 L) |
Attachments

The John Deere 4320 Utility Tractor supports a wide range of attachments for various agricultural, landscaping, and construction tasks. Below is a categorized list of compatible attachments:
John Deere 400X and 400CX Loader

Model |
400X Loader |
400CX Loader |
Lift Capacity (full at pin) |
2346 lb (1064 kg) |
2383 lb (1081 kg) |
Boom Breakout Force (at pin) |
3453 lbf (15.36 kN) |
3435 lbf (15.28 kN) |
Boom Breakout Force (at 500 mm) |
2606 lbf (11.59 kN) |
3055 lbf (13.59 kN) |
Bucket Rollback Force (at Max. Height) |
1967 lbf (8.75 kN) |
3316 lbf (14.75 kN) |
Bucket Rollback Force (at Ground Level) |
3289 lbf (14.63 kN) |
4638 lbf (20.63 kN) |
Dump Angle |
46° |
45° |
Dump Angle (at Ground) |
130° |
86.5° |
Rollback Angle |
32° |
43° |
Rollback Angle (at Full Height) |
117° |
43° |
Reach (dumped) |
24.4 in (610 mm) |
24.8 in (620 mm) |
Reach (ground) |
64.3 in (1630 mm) |
64.7 in (1640 mm) |
Height (to Pivot Pin) |
112.8 in (2867 mm) |
112.8 in (2867 mm) |
Clearance (dumped) |
89.5 in (2270 mm) |
89.7 in (2270 mm) |
Clearance (level) |
104.8 in (2660 mm) |
104.8 in (2660 mm) |
Digging Depth |
6.6 in (167 mm) |
6.6 in (167 mm) |
Weight |
927 lb (420 kg) |
1100 lb (498 kg) |
Bucket Width |
61 in (1540 mm)
73 in (1850 mm) |
61 in (1540 mm)
73 in (1850 mm) |
Tractor Compatibility |
4120, 4320, 4520, 4720 |
4120, 4320, 4520, 4720 |
John Deere 485 Backhoe

Model |
John Deere 485 |
Bucket Digging Force (SAE) |
3730 lb (16.59 kN) |
Dipperstick Digging Force (SAE) |
2435 lb (10.83 kN) |
Boom Lift Capacity |
820 lb (372 kg) |
Digging Depth |
105 in (2670 mm) |
Reach from Pivot |
142 in (3600 mm) |
Loading Height |
88 in (2230 mm) |
Bucket Rotation |
180° |
Swing Arc |
180° |
Weight |
1460 lb (662 kg) |
Bucket Control Main Relief Valve Pressure |
2250 psi (17580 kPa) |
Backhoe Transport Height |
90 in (2290 mm) |
Stabilizers Spread Width |
54 in (1370 mm) |
Bucket Width |
12 in (305 mm); 18 in (457 mm); 24 in (610 mm); 36 in (914 mm) |
72″ Mower deck
Model |
72″ Mower deck |
Type |
Mid-mount John Deere |
Blades |
3-blade with hydraulic lift |
Cutting Height |
1 to 9.6 in (20 to 240 mm) |
Cutting width |
72 in (1820 mm) |
Overall width |
85 in (2150 mm) |
Weight |
448 lb (203 kg) |
- Mowers & Cutters:
– Mid-Mount Mower Deck (72-inch) – Ideal for turf maintenance.
– Rotary Cutters (Frontier RC2060, RC2072, RC2084) – For clearing brush and pasture maintenance.
– Grooming Mowers (Frontier GM2060, GM2072, GM2084) – For finer grass cutting.
- Tillage & Soil Preparation:
– Frontier RT1165 / RT1173 Rotary Tillers – Great for seedbed preparation.
– Disk Harrows (Frontier DH1066, DH1080) – For soil conditioning and leveling.
- Snow Removal:
– John Deere 59-inch Snow Blower – Two-stage blower for clearing deep snow.
– Front Blades (72-inch and 84-inch options) – Hydraulic angle blades for pushing snow and debris.
- Other Attachments:
– Pallet Forks (AP10F, AP11F, AP12F) – For material handling.
– Post Hole Diggers (PHD100, PHD200, PHD300) – For fence building and tree planting.
– Box Blades (Frontier BB2072, BB2084) – For grading and leveling.