John Deere 7310R MFWD Tractor


Wheelbase

Mfwd Axle Ground Clearance With Standard Mfwd Tyres 19.5 in (495.3 mm)
Mfwd 115.2 in (2926.1 mm)

Engine Details

Rated Engine Speed 2,100 rpm
Compression Ratio 16.0:1
Lubrication Full-pressure, full-flow filtration with bypass
PTO Power 260 hp (193.9 kw)
PTO Torque Rise 40%
Displacement 549 cu in (9 L)
Max Power 341 hp (254.3 kw)
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Description John Deere PowerTech PSS 9.0L Engine: B20 Diesel Compatible, in-line, 6-cylinder, wet-sleeve with 4 valves-in-head
Oil Filter Replaceable cartridge-style
Power Boost (Available In Transport And/Or Mobile PTO Applications) 10%
Bore And Stroke 4.66 in. (118 mm) x 5.35 in. (136 mm)
Filter, Engine Air Dual stage

Electrical

Description Two batteries in parallel
Alternator/Battery Standard: 200 amps/12 Volt Available: 240 amps/12 Volt

Fuel System

Fuel Tank Capacity Fuel-tank capacity PST, G47/48 475L (125 gal) Fuel-tank capacity IVT, G47/48 520L (137 gal.) Fuel-tank capacity PST, G49 — 497L (131 gal) Fuel-tank capacity IVT, G49 — 543L (143 gal)
Description Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming)
Filter Primary 10 micron replaceable cartridge with water indication sensor and drain
Filter Secondary 2 micron spin-on element
Filter System Two-stage with water separator and service-indicator light
DEF Tank Capacity 6 gal (22.8 L)
Required Fuel Type Ultralow sulfur diesel (B20 diesel compatible)

PTO (Power Take-Off)

PTO Speeds @ Engine Rpm Rear Independent- 540/1,000 at 1,950 engine rpm; 540E/1,000E PTO at 1,750 engine rpm . Front Independent- PTO Speed at engine RPM (1:2 ratio) 1,000 PTO rpm at 1,940E rpm WHEELBASE

Steering

Hydraulic Power-Steering Standard: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel
Active Command Steering (Acs) Available: Variable ratio 15:1 to 23:1 (3.1-5.0 turns lock to lock) w/Stability Augmentation and passive tactile feedback-345mm diameter steering wheel HYDRAULIC SYSTEM

Transmission

E23 Transmission 50k, 31 Mph (50 Km/H Standard 50 kph @ 1900 rpm w/grp 48 tires, 50kph @ 1800 rpm w/grp 49 tires)
John Deere Infinitely Variable Transmission (Ivt), 26 Mph (40 Km/H Available
John Deere Infinitely Variable Transmission (Ivt), 31 Mph (50 Km/H) Available
E23 Transmission 40k, 26 Mph (40 Km/H) Standard 40 kph @ 1600 rpm w/grp 48 tires, 40kph @ 1520 rpm w/grp 49 tires

Tires

Rear Group 48/49 tires available as Singles/Duals

Weights

Tls 25738 lb (11674.6 kg)

Hydraulic

Maximum Operating Pressure 2958 psi (20394.7 kPa)
Available Flow At Front Scvs 33 U.S. gpm (126 L/min)
Scv Control 3, 4 Standard, 5 and 6 Available

Axles

Diameter Rear Axle Diameters: 3.94 x 100.4 in. (100 x 2550 mm) diameter Available — 3.94 x 110.5 in. (100 x 2808 mm) diameter Available — 3.94 x 118.5 in. (100 x 3012 mm) diameter Available — 4.33 x 100.4 in. (110 x 2550 mm) diameter — Available 4.33 x 118.5 in. (110 x 3012 mm) diameter — Available 4.72 x 100.4 in. (120 x 2550 mm) diameter — Available 4.72 x 118.5 in. (120 x 3012 mm) diameter
1300 Series Mfwd, Tread Range 60 To 88 In. (1524 To 2235 Mm) Standard
Triple Link Suspension Front Axle: Triple Link Suspension Plus (TLS), tread range 60 to 88 in. (1524 to 2235 mm) Available Triple Link Suspension Plus (TLS), with front brakes, available with 40 km/h transmissions (standard with 50 km/h transmissions) – Available

Hydraulic

Description Closed-center, pressure and flow compensated
Main Pump, Axial Piston (Displacement) 63 cc standard 85 cc available
Rated Flow Rated flow, 63 cc pump 43 U.S. gpm (162 L/min) Rated flow, 85 cc pump 59 U.S. gpm (223.3 L/min) Available flow at a single rear SCV 35 U.S. gpm (132 L/min
Available Flow At A Single Rear Scv 35 U.S. gpm (132 L/min)

Final Drive

Description Inboard planetary, three pinion

3-Point Hitch

Description Category 3N, available Premium Front Hitch for use with ground-engaging front implements
Lift Capacities – Standard 11464 lb (5200 kg)
Ask a question