Contents
Dimensions
| Length | 322 in (8170 mm) |
| Wheelbase | 116.5 in (4154 mm) |
| Height (exhaust) | 162.3 in (4120 mm) |
| Clearance (drawbar) | 15.75 in (400 mm) |
| Turning Radius (Scraper Special models) | 30.0 ft (9144 mm) |
| Turning Radius (Ag models) | 21.0 ft (6400 mm) |
| Width (36″ tracks) | 123.2 in (3120 mm) |
| Width (30″ tracks) | 117.2 in (2970 mm) |
Engine Details
| Number Of Cylinders | 6 |
| Engine Make | John Deere |
| Engine Model | John Deere PowerTech™ PSS 13.5L |
| Max Power | 572 hp (426.6 kw) |
| Rated Power | 520 hp (387.8 kw) |
| Power Measured @ | 1900 rpm |
| Peak Torque | 1962 lb ft (2660 Nm) |
| Power Measured @ | 1500 rpm |
| Torque Rise | 38 % |
| Power Boost | 10 % |
| Displacement | 824 cu in (13.6 L) |
| Bore | 5.2 in (132 mm) |
| Stroke | 6.5 in (165 mm) |
| Compression Ratio | 16:0:1 |
| Aspiration | Dual series turbocharger with air-to-air aftercooling and cooled EGR |
| Emission Standards | Tier 3 / Stage III |
Electric System
| Alternator | 200 amps (240 amps optional) |
| Battery | 3x 12 V, 925 CCA |
| Operation Voltage | 12 V |
Transmission
| Type | PowerShift Transmission |
| Model | e18™ PowerShift with Efficiency Manager™ |
| Number of Gears | 18F + 6R |
| Max Speed | 25 mph (40 kph) |
| Hydraulic Power-Steering | Standard + Active Command Steering (ACS) |
Axles
| Description | Bull gear and double idler with floating pinion. |
| 120 Mm Flanged | Standard |
| Rear Axle Supports | Available (included with 3 point hitch) |
| Front Axle Supports | Available (with sprayer tanks or dozer blade) |
Hydraulic System
| Hydraulic System Type | Closed-center, pressure/flow compensated |
| Maximum Pump Flow With Base Hydraulics | 58 gal/min (219.6 L/min) |
| Maximum Pump Flow: High-Flow | 115 gal/min (435.4 L/min) |
| Available Flow At A Single SCV – 1 /2 In Coupler | 35 gal/min (132.5 L/min) |
| Available Flow At A Single SCV With High-Flow – 3 /4 In Coupler | 42 gal/min (159 L/min) |
| Maximum Operating Pressure | 2900 psi (20000 kPa) |
| SCV Control | 4 – 6 factory, up to 8 field installed |
3-Point Hitch
| Hitch Description | Electric-Hydraulic 3-Point Hitch with Draft Sensing |
| Category 4n/3 With Quik-Coupler | 15000 lb (6804 kg) / 20000 lb (9072 kg) / 15000 lb (6804 kg) / 20000 lb (9072 kg) |
Service Refill Capacities
| Fuel Tank Capacity | 400 gal (1514.2 L) |
| Engine Oil Capacity | 12.7 gal (48.1 L) |
| DEF Tank Capacity | 22 gal (83.3 L) |
| Cooling System Capacity | 14.9 gal (56.5 L) |
| Hydraulic/Transmission/Axle Oil Without 3-Point Rear Hitch And Pto | 58 gal (219.6 L) |
| Hydraulic/Transmission/Axle Oil With 3-Point Rear Hitch And Pto | 60 gal (227.2 L) |
Fuel System
| Description | Electronically controlled, electronic unit injectors (self priming) |
| Filter Primary | 10 micron replaceable cartridge w/water indication sensor and drain |
| Filter Secondary | 2 micron spin-on element |
| Filter System | Two Stage with water separator and service indicator light |
