Kubota M5660SUH Tractor

Dimensions

Overall Length 138.78 in (3525 mm)
Wheelbase 6.85 ft in (2085 mm)
Overall Width 6.11 ft in (1860 mm)
Ground Clearance 16.34 in (415 mm)
Height With ROPS 7.94 ft in (2420 mm)
Front Tread Range 71.66 in (1820 mm)
Rear Tread Range 67.72 in (1720 mm)

Tires

Front Tire Size 6.5–16
Rear Tire Size 14.9–28

Engine Details

Number Of Cylinders 4
Engine Make Kubota
Engine Type Kubota V2403-CR-TE4
Displacement 148.5 cu in (2.43 L)
Net Power 56 hp (41.8 kw)
Gross Power 57.9 hp (43.2 kw)
Power Measured @ 2600 rpm
Air Cleaner Dry, dual element
Aspiration Turbocharged
Emission Standards EPA/CARB Tier 4 + EU Stage IIIB

Operational Specs

Operating Weight 4189 lb (1900 kg)
Operating Voltage 12 V
Alternator 45 amps
Battery 12 V, 95 Ah
Turning Radius 11.9 ft in (3600 mm)

PTO (Power Take-Off)

PTO Speed 540 rpm
PTO Power 50 hp (37.3 kw)
PTO Type Live-independent, hydraulic PTO

Transmission

Shuttle (Forward-Reverse) Hydraulic shuttle
Brake Type Mechanical wet disc
Clutch Disk Diameter Wet Clutch Multiple wet disk
Differential Lock Rear standard (mechanical)
Number Of Forward Gears 8
Number Of Reverse Gears 8
Max Travel Speed (Forward) 18.2 mph (29.3 km/h)
Max Travel Speed (Reverse) 18.6 mph (29.9 km/h)

Hydraulic System

Controls Position
Number Of Remote Control Valves 1 (2nd, 3rd optional)
3 Point Hitch Type Category I & II
3 Point Hitch Lift Capacity @ 24 Inches 3307 lb (1500 kg)

Service Refill Capacities

Fuel Tank Capacity 17.7 gal (67 L)
Engine Oil Capacity 2.5 gal (9.5 L)
Cooling System Capacity 2.2 gal (8.4 L)
Hydraulic System Capacity 10.6 gal (40.2 L)
Comments: 2
  1. Robert Bain

    I have a 2019 Kubota M5660SUHD tractor. I have an ERROR 2 display. This started after a large stick hit the accelerator throttle cable just under the foot throttle. I don’t see any physical damage but after starting normally the RPM drops down to 1000 after running a minute or so. I cannot get the error to clear.

    1. David R. Ledford

      ERROR-2 – Acceleration sensor (sub) trouble. This sensor plays a crucial role in monitoring the tractor’s speed and ensuring optimal performance! Inspect Connections: Check the wiring and connectors related to the acceleration sensor for any signs of damage or disconnection. If the error persists after performing the above steps, it’s advisable to contact your local Kubota dealer or a qualified technician for a thorough diagnosis and repair.

Ask a question