Dimensions
| 1. Ground To Top Of Beacon |
13.1 ft in (4.0 m) |
| 2. Ground To Top Of Exhaust Stack |
11.1 ft in (3.39 m) |
| 3. Ground To Top Of Hood |
8.6 ft in (2.63 m) |
| 4. Ground Clearance – Bumper |
2.3 ft in (0.71 m) |
| 5. Centerline Of Rear Axle To Edge Of Bumper |
6.5 ft in (1.99 m) |
| 6. Wheelbase |
11 ft in (3.36 m) |
| 7. Length To Front Tire |
20.9 ft in (6.38 m) |
| 8. Length – With Blade On Ground – Straight Blade |
23.6 ft in (7.2 m) |
| 9. Length Of Coal Blade On Ground |
25.5 ft in (7.78 m) |
| 10. Centerline Of Front Axle To Hitch |
5.5 ft in (1.68 m) |
| 11. Ground Clearance |
1.4 ft in (0.43 m) |
| 12. Height – Top Of Cab |
12.1 ft in (3.69 m) |
Weight
| Operating Weight |
47776 lb (21671 kg) |
| Operating Weight with Straight Blade |
48390 lb (21950 kg) |
| Operating Weight with Coal Blade |
49860 lb (22616 kg) |
| Straight Blade Weight |
3000 lb (1361 kg) |
| Coal Blade Weight |
4429 lb (2009 kg) |
Engine Details
| Cat C7.1 ACERT |
Tier 4 Final / Stage IV |
Tier 3 / Stage IIIa |
| Number of Cylinders |
6 |
6 |
| Displacement |
427.7 cu in (7 L) |
427.7 cu in (7 L) |
| Bore |
4.1 in (105 mm) |
4.1 in (105 mm) |
| Stroke |
5.3 in (135 mm) |
5.3 in (135 mm) |
| Compression Ratio |
16.5:1 |
16.5:1 |
| Gross Power (SAE J1995) |
284 hp (211.8 kw) |
286 hp (213.3 kw) |
| Net Power (SAE J1349) |
248 hp (185 kw) |
249 hp (185.7 kw) |
| Power Measured @ |
1700 rpm |
2200 rpm |
| Peak Torque |
899 lb ft (1218.9 Nm) |
749 lb ft (1015.6 Nm) |
| Peak Measured @ |
1400 rpm |
1400 rpm |
| Torque Rise |
52% |
26% |
| Aspiration |
Turbocharged and aftercooled |
Turbocharged and aftercooled |
| Emissions |
US EPA Tier 4 Final / EU Stage IV |
US EPA Tier 3, EU Stage IIIA, Brazil MAR-1, China Nonroad Stage III |
Transmission
| Type |
Cat Planetary Power Shift Transmission |
| Number of Gears |
4F / 4R |
| Forward – 1 |
3.6 mph (5.8 km/h) |
| Forward – 2 |
6.3 mph (10.2 km/h) |
| Forward – 3 |
11 mph (17.8 km/h) |
| Forward – 4 |
19 mph (30.6 km/h) |
| Reverse – 1 |
4.1 mph (6.6 km/h) |
| Reverse – 2 |
7.2 mph (11.6 km/h) |
| Reverse – 3 |
12.5 mph (20.2 km/h) |
| Reverse – 4 |
21.5 mph (34.7 km/h) |
Operational Specs
| Operating Voltage |
24 V |
| Alternator |
150 amps |
| Front Axle |
Planetary Fixed |
| Rear Axle |
Planetary Oscillating |
| Axle Oscillation Angle |
10° |
| Service Brakes |
Single Disc Wet (enclosed) 4 WHL |
| CAT 814K Cab Type |
Standart |
Suppression |
| Operator Sound Level (Iso 6396) |
71 dB(A) |
70 dB(A) |
| Machine Sound Level (Iso 6395) |
111 dB(A) |
109 dB(A) |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008.
Hydraulic System – Lift/Tilt
| Lift/Tilt System – Circuit |
Pilot operated LS valve with EH |
| Relief Valve Setting – Lift/Tilt |
3190 psi |
| Cylinders, Double Acting – Lift, Bore And Stroke |
4.7 in (120 mm) / 36.0 in (915 mm) |
| Pilot System |
Open center, fixed displacement gear |
| Lift/Tilt System |
Variable displacement piston |
| Cylinders, Double Acting – Left And Right Tilt, Bore And Stroke |
4.0 in (101.6 mm) / 9.2 in ( 234 mm) |
| Pilot Relief Valve Setting |
3046 psi |
| Maximum Flow At 2,200 Rpm |
23.5 gal/min |
Hydraulic System – Steering
| Steering System – Circuit |
Pilot, load sensing |
| Steering System – Pump |
Variable displacement piston |
| Relief Valve Setting – Steering |
4003 psi |
| Steering Cycle Times – Low Idle |
8.2 s |
| Steering Cycle Times – High Idle |
3 s |
| Maximum Flow At 2,200 Rpm |
38.8 gal/min |
Service Refill Capacities
| Fuel Tank Capacity |
132.1 gal (500 L) |
| DEF Tank Capacity |
4.2 gal (16 L) |
| Engine Oil Capacity |
5.3 gal (20 L) |
| Cooling Systems (Tier 4 Final / Stage IV) |
21.4 gal (81 L) |
| Cooling Systems (Tier 3 / Stage IIIa) |
19.3 gal (73 L) |
| Transmission Oil Capacity |
13.2 gal (50 L) |
| Differential – Final Drives – Front |
17.2 gal (65 L) |
| Differential – Final Drives – Rear |
17.2 gal (65 L) |
| Hydraulic System Capacity (w/ Tank) |
34.1 gal (129 L) |
| Hydraulic Tank Capacity |
19.8 gal (75 L) |
