Case 821E Wheel Loader

Bucket

Dump Clearance At Max Raise 9.72 ft in (2960 mm)
Bucket Capacity – Heaped 4.43 yd3 (3.39 m3)
Bucket Capacity – Struck 3.78 yd3 (2.89 m3)
Bucket Width 9.6 ft in (2930 mm)
Breakout Force 34416 lb (153.09 kN)

Dimensions

Ground Clearance 1.37 ft in (415.8 mm)
Length With Bucket On Ground 25.9 ft in (7890 mm)
Width Over Tires 9.47 ft in (2890 mm)
Height To Top Of Cab 11.4 ft in (3450 mm)
Wheelbase 10.98 ft in (3340 mm)
Hinge Pin – Max Height 13.51 ft in (4120 mm)
Reach At Max Lift And Dump 3.71 ft in (1130 mm)

Engine Details

Number Of Cylinders 6
Engine Make Case
Engine Model Family IV, 667TA/EBD Tier III Certified
Net Power 198 hp (148 kw)
Gross Power 210 hp (157 kw)
Power Measured @ 1800 rpm
Max Torque 724 lb ft (981.7 Nm)
Displacement 411 cu in (6.7 L)
Torque Measured @ 1400 rpm
Aspiration Turbocharged and Aftercooled

Operational Specs

Operating Weight 37844 lb (17166 kg)
Fuel Tank Capacity 76 gal (288 L)
Hydraulic System Fluid Capacity 46 gal (174 L)
Engine Oil Fluid Capacity 5.6 gal (21 L)
Cooling System Fluid Capacity 110.8 gal (40.9 L)
Transmission Fluid Capacity 10.5 gal (39.7 L)
Front Axle/Diff Fluid Capacity 9.9 gal (37.4 L)
Rear Axle/Diff Fluid Capacity 6.3 gal (23.7 L)
Static Tipping Weight 31376 lb (14232 kg)
Turning Radius 19.8 ft in (6030 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 70 amps
Rear Axle Oscillation 24 degrees
Tire Size 23.5 x 25 l2 bias

Transmission

Transmission Type 4F/3R Proportional w/Electronic Control Module
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 23 mph (37 km/h)
Max Speed – Reverse 15.7 mph (25.3 km/h)

Hydraulic System

Relief Valve Setting 3600 psi (24821 kPa)
Pump Flow Capacity 31.6 gal/min (119.6 L/min)
Raise Time 5.6 sec
Dump Time 1.2 sec
Lower Time 2.8 sec
Pump Type closed centered pressure/flow compensated
Ask a question