Case 921E Wheel Loader

Bucket

Dump Clearance At Max Raise 10.09 ft in (3080 mm)
Bucket Capacity – Heaped 5.78 yd3 (4.42 m3)
Bucket Capacity – Struck 4.88 yd3 (3.74 m3)
Bucket Width 10.4 ft in (3170 mm)
Breakout Force 44476 lb (197.84 kN)

Dimensions

Ground Clearance 1.6 ft in (487.68 mm)
Length With Bucket On Ground 28.88 ft in (8800 mm)
Width Over Tires 9.81 ft in (2987 mm)
Height To Top Of Cab 12.12 ft in (3700 mm)
Wheelbase 11.17 ft in (3400 mm)
Hinge Pin – Max Height 14.03 ft in (4280 mm)
Reach At Max Lift And Dump 4.17 ft in (1270 mm)

Engine Details

Number Of Cylinders 6
Engine Make Cummins
Engine Model QSM 11, Tier III Certified
Net Power 297 hp (221 kw)
Gross Power 274 hp (204 kw)
Power Measured @ 1800 rpm
Max Torque 1013 lb ft (1373 Nm)
Displacement 660 cu in (10.8 L)
Torque Measured @ 900 rpm
Aspiration Turbocharged with Aftercooler

Operational Specs

Operating Weight 50622 lb (22962 kg)
Fuel Tank Capacity 104 gal (393.7 L)
Hydraulic System Fluid Capacity 64 gal (242 L)
Engine Oil Fluid Capacity 9.8 gal (36.9 L)
Cooling System Fluid Capacity 15 gal (56.8 L)
Transmission Fluid Capacity 10.5 gal (39.7 L)
Front Axle/Diff Fluid Capacity 12.5 gal (47.3 L)
Rear Axle/Diff Fluid Capacity 12.5 gal (47.3 L)
Static Tipping Weight 42592 lb (19319 kg)
Turning Radius 22.6 ft in (6870 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 95 amps
Rear Axle Oscillation 24 degrees
Tire Size 26.5 x 25 L3 Bias

Transmission

Transmission Type 4F/3R Proportional w/Electronic Control Module
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 23.2 mph (37.4 km/h)
Max Speed – Reverse 16.1 mph (25.8 km/h)

Hydraulic System

Relief Valve Setting 3600 psi (24821 kPa)
Pump Flow Capacity 42.8 gal/min (162.1 L/min)
Raise Time 6.2 sec
Dump Time 3.6 sec
Lower Time 3 sec
Pump Type closed centered pressure/flow compensated
Ask a question