Contents
- Dimensions (Approximate) – High Lift
- Dimensions (Approximate) – Standard Lift
- Engine Details
- Operational Specs
- Transmission
- Weights
- Buckets
- Hydraulic System
- Service Refill Capacities
- Cab
- Operating Specifications – High Lift
- Operating Specifications – Standard Lift
- Maximum Material Densities – General Purpose
- Maximum Material Densities – Light Material
Dimensions (Approximate) – High Lift
| Ground Clearance | 10 in (254 mm) |
| Articulation Angle | 40 degrees |
| Cab Height | 8.25 ft in (2.52 m) |
| Reach – Ground Level | 3.25 ft in (1 m) |
| Departure Angle – Degrees | 30 degrees |
| Dig Depth | 8 in (203.2 mm) |
| Dump Angle At Maximum Height | 40 degrees |
| Fork Depth Above Ground | 2 in (50.8 mm) |
| Fork Height At Maximum Reach | 4.67 ft in (1.43 m) |
| Fork Reach At Maximum Height | 2 ft in (0.61 m) |
| Hinge Pin At Maximum Height | 10.58 ft in (3.23 m) |
| Load Over Height | 9.67 ft in (2.95 m) |
| Machine Width** | 5.58 ft in (1.71 m) |
| Maximum Dump Height* | 8 ft in (2.44 m) |
| Maximum Fork Height | 10.33 ft in (3.15 m) |
| Maximum Reach | 4.92 ft in (1.5 m) |
| Note (1) | *Vary with bucket size. |
| Note (2) | **Vary with tire size. |
| Note (3) | Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 15.5-16.5, 12 PR tires, without ride control, without precleaner. |
| Overall Length – With Bucket* | 16.18 ft in (4.93 m) |
| Overall Length – With Forks | 17.58 ft in (5.36 m) |
| Reach At Maximum Dump Height* | 2.42 ft in (0.74 m) |
| Steering Angle | 80 degrees |
| Tire Gauge | 4.33 ft in (1.32 m) |
| Turning Radius – Inside Tire** | 5.92 ft in (1.81 m) |
| Turning Radius – Over Bucket* | 13.42 ft in (4.1 m) |
| Wheel Base | 6.42 ft in (1.96 m) |
| Width – Over Bucket* | 5.83 ft in (1.78 m) |
Dimensions (Approximate) – Standard Lift
| Ground Clearance | 10 in (254 mm) |
| Wheel Base | 6.42 ft in (1.96 m) |
| Steering Angle | 80 degrees |
| Note (1) | *Vary with bucket size. |
| Departure Angle – Degrees | 30 degrees |
| Note (2) | **Vary with tire size. |
| Dig Depth | 6 in (152.4 mm) |
| Width – Over Bucket* | 5.83 ft in (1.78 m) |
| Dump Angle At Maximum Height | 40 degrees |
| Note (3) | Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 15.5-16.5, 12 PR tires, without ride control, without precleaner. |
| Fork Depth Above Ground | 2 in (50.8 mm) |
| Tire Gauge | 4.33 ft in (1.32 m) |
| Fork Height At Maximum Reach | 4.67 ft in (1.43 m) |
| Overall Length – With Bucket* | 15.75 ft in (4.81 m) |
| Fork Reach At Maximum Height | 2 ft in (0.61 m) |
| Turning Radius – Over Bucket* | 13.17 ft in (4.02 m) |
| Cab Height | 8.25 ft in (2.52 m) |
| Hinge Pin At Maximum Height | 10.08 ft in (3.08 m) |
| Overall Length – With Forks | 17.08 ft in (5.21 m) |
| Load Over Height | 9.17 ft in (2.8 m) |
| Turning Radius – Inside Tire** | 5.92 ft in (1.81 m) |
| Machine Width** | 5.58 ft in (1.71 m) |
| Reach – Ground Level | 2.67 ft in (0.82 m) |
| Maximum Dump Height* | 7.5 ft in (2.29 m) |
| Articulation Angle | 40 degrees |
| Maximum Fork Height | 9.83 ft in (3 m) |
| Maximum Reach | 4.5 ft in (1.38 m) |
| Reach At Maximum Dump Height* | 2.33 ft in (0.72 m) |
Engine Details
| Gross Power | 42 hp (31.4 kw) |
| Displacement | 147 cu in (2.5 L) |
| Bore | 3.4 in (86.4 mm) |
| Stroke | 4 in (101.6 mm) |
| Engine Model | Cat C2.4* |
| Note | *Engine meets U.S. EPA Tier 4 Final emission standards. |
| Maximum Gross Power | 42 hp (31.4 kw) |
| Net Power – 2,200 Rpm – Sae J1349 Rating | 40 hp (29.9 kw) |
| Net Power – 2,200 Rpm – Iso 9249 Rating | 40 hp (29.9 kw) |
Operational Specs
| Operating Weight | 9414 lb (4270.2 kg) |
Transmission
| Travel Speed | 12.4 mph (20 km/h) |
Weights
| Operating Weight | 9414 lb (4270.2 kg) |
Buckets
| Bucket Capacities | 0.6-1.0 m (0.8-1.3 yd) |
Hydraulic System
| Hydraulic Cycle Time – Dump | 0.7 s |
| Hydraulic Cycle Time – Lift | 4.4 s |
| Main Relief | 3481 psi |
| 3rd Auxiliary Flow | 14 gal/min |
| Hydraulic Cycle Time – Lower, Float | 2.4 s |
Service Refill Capacities
| Cooling System | 3 gal (11.4 L) |
| Fuel Tank Capacity | 11.4 gal (43.2 L) |
| Hydraulic System | 6.3 gal (23.9 L) |
| Engine Oil | 2.4 gal (9.1 L) |
Cab
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
Operating Specifications – High Lift
| Breakout Force | 6204 lb (2814.1 kg) |
| Tire Size | 33 15.5-16.5, 12 PR |
| Rated Bucket Capacity | 0.8 yd3 (0.7 m3) |
| Rack Back – Transport Position | 51 degrees |
| Note (1) | *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. |
| Note (2) | **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. |
| Note (3) | ***Manual quick coupler, precleaner hood. |
| Note (4) | Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. |
| Rated Operating Load At Full Turn – Bucket*** | 2502 lb (1134.9 kg) |
| Straight Tipping Load – Bucket*** | 5975 lb (2710.3 kg) |
| Full Turn Static Tipping Load – Bucket (Iso 14397-1*)*** | 5004 lb (2269.8 kg) |
| Full Turn Static Tipping Load – Bucket (Rigid Tire**)*** | 5115 lb (2320.2 kg) |
| Rated Operating Load At Full Turn – Forks (En 474-3:2006, Firm And Level Ground, 500 Mm [20 In] Load Center) (80% Ftstl)*** | 3660 lb (1660.2 kg) |
| Rated Operating Load At Full Turn – Forks (En 474-3:2006, Rough Terrain, 500 Mm [20 In] Load Center) (60% Ftstl)*** | 2756 lb (1250.2 kg) |
Operating Specifications – Standard Lift
| Breakout Force | 6160 lb (2794.2 kg) |
| Rated Bucket Capacity | 0.8 yd3 (0.7 m3) |
| Tire Size | 33 15.5-16.5, 12 PR |
| Rack Back – Transport Position | 51 degrees |
| Note (1) | *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. |
| Note (2) | **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. |
| Note (3) | ***Manual quick coupler, precleaner hood. |
| Note (4) | Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. |
| Rated Operating Load At Full Turn – Bucket*** | 2701 lb (1225.2 kg) |
| Straight Tipping Load – Bucket*** | 6415 lb (2909.8 kg) |
| Full Turn Static Tipping Load – Bucket (Iso 14397-1*)*** | 5401 lb (2449.9 kg) |
| Full Turn Static Tipping Load – Bucket (Rigid Tire**)*** | 5512 lb (2500.3 kg) |
| Rated Operating Load At Full Turn – Forks (En 474-3:2006, Firm And Level Ground, 500 Mm [20 In] Load Center) (80% Ftstl)*** | 3902 lb (1770 kg) |
| Rated Operating Load At Full Turn – Forks (En 474-3:2006, Rough Terrain, 500 Mm [20 In] Load Center) (60% Ftstl)*** | 2932 lb (1330 kg) |
Maximum Material Densities – General Purpose
| Note | Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. |
| Bucket Type | General Purpose |
| Rated Capacity | 0.8 yd3 (0.7 m3) |
| Dump Height | 90 in (2286 mm) |
| Maximum Material Density | 3169 lb/yd |
| Bucket Width | 70 in (1778 mm) |
Maximum Material Densities – Light Material
| Note | Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. |
| Bucket Type | Light Material |
| Rated Capacity | 1.3 yd3 (1 m3) |
| Dump Height | 85 in (2159 mm) |
| Maximum Material Density | 1989 lb/yd |
| Bucket Width | 74 in (1879.6 mm) |
