CAT 907M Ag Handler Wheel Loader Specs, Weight & Dimensions

Contents

Dimensions – With Iso Coupler – Approximate

Width – Tread Center	4.58 ft in (1.4 m)
Note	Dimensions shown are based on the machine equipped with general purpose bucket and standard 340/80 R18, MX, XMCL tires.
Articulation Angle	39 degrees
Clearance – Bucket At 45 Degrees	8.08 ft in (2.47 m)
Clearance – Full Lift	9.92 ft in (3.03 m)
Clearance – Level Arm	4.42 ft in (1.35 m)
Clearance – Level Bucket	9.83 ft in (3 m)
Departure Angle	33 degrees
Dig Depth	4.2 in (106.68 mm)
Dump Angle At Full Lift	45 degrees
Fork Dig Depth	3.1 in (78.74 mm)
Fork Reach At Full Lift	1.42 ft in (0.44 m)
Height – Bucket Pin	10.5 ft in (3.21 m)
Height – Ground Clearance	11 in (279.4 mm)
Height – Ground To Cab	8.33 ft in (2.54 m)
Length – Overall With Bucket	17.68 ft in (5.39 m)
Length – Overall With Forks	19.43 ft in (5.92 m)
Length – Wheel Base	7.08 ft in (2.16 m)
Reach – Bucket At 45 Degrees	2.42 ft in (0.74 m)
Reach – Ground	2.42 ft in (0.74 m)
Reach – Level Arm	4 ft in (1.22 m)
Turning Radius – Inside Tire	6.83 ft in (2.09 m)
Turning Radius – Over Bucket	14.67 ft in (4.48 m)
Width – Bucket	6.67 ft in (2.04 m)
Width – Over Tires	6 ft in (1.83 m)

Reach – Level Arm	4.17 ft in (1.28 m)
Width – Tread Center	4.58 ft in (1.4 m)
Articulation Angle	39 degrees
Height – Ground To Cab	8.33 ft in (2.54 m)
Length – Overall With Bucket	18.18 ft in (5.54 m)
Clearance – Bucket At 45 Degrees	7.75 ft in (2.37 m)
Clearance – Full Lift	10.17 ft in (3.1 m)
Turning Radius – Inside Tire	6.83 ft in (2.09 m)
Clearance – Level Arm	4.67 ft in (1.43 m)
Width – Over Tires	6 ft in (1.83 m)
Clearance – Level Bucket	9.83 ft in (3 m)
Length – Overall With Forks	19.43 ft in (5.92 m)
Departure Angle	33 degrees
Length – Wheel Base	7.08 ft in (2.16 m)
Dig Depth	4.5 in (114.3 mm)
Turning Radius – Over Bucket	14.75 ft in (4.5 m)
Reach – Bucket At 45 Degrees	2.75 ft in (0.84 m)
Dump Angle At Full Lift	43 degrees
Fork Dig Depth	0.2 in (5.08 mm)
Note	Dimensions shown are based on the machine equipped with general purpose bucket and standard 340/80 R18, MX, XMCL tires.
Fork Reach At Full Lift	1.67 ft in (0.51 m)
Reach – Ground	2.42 ft in (0.74 m)
Height – Bucket Pin	10.5 ft in (3.21 m)
Width – Bucket	6.67 ft in (2.04 m)
Height – Ground Clearance	11 in (279.4 mm)

Emissions	*The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards.
Maximum Gross Power – Sae J1995	74 hp (55.2 kw)
Maximum Net Power – Sae J1349	68 hp (50.8 kw)
Maximum Gross Power – Iso 14396	73 hp (54.5 kw)
Rated Net Power – 2,500 Rpm – Sae J1349	68 hp (50.8 kw)
Maximum Net Power – Iso 9249	69 hp (51.5 kw)
Maximum Gross Power	73 hp (54.5 kw)

Operating Weight

12958 lb (5877.7 kg)

Operating Weight	12958 lb (5877.7 kg)
Note	Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, skid steer loader coupler (SSL) and general purpose bucket (GP).

Bucket Capacities	ISO Coupler – 0.75-1.2 m; SSL Style Coupler – 1.0-1.6 yd
Bucket Capacities – Iso Coupler	0.75-1.2 m
Bucket Capacities – Ssl Style Coupler	1.0-1.6 yd

Hydraulic Cycle Time – Dump	1.3 seconds
Main Relief – 3rd Aux Flow: Standard	20 gal/min
Main Relief – 3rd Aux Flow	3400 psi
Main Relief – 3rd Aux Flow: High Flow	31 gal/min
Hydraulic Cycle Time – Lift	5.2 seconds
Hydraulic Cycle Time – Rackback	2.1 seconds
Hydraulic Cycle Time – Lower	3.2 seconds

Bucket Width	80 in (2032 mm)
Maximum Material Density	3031 lb/yd
Rated Capacity	1.2 yd3 (1 m3)
Dump Height	97 in (2463.8 mm)
Note	Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.

Bucket Width	82 in (2082.8 mm)
Maximum Material Density	2363 lb/yd
Rated Capacity	1.6 yd3 (1.3 m3)
Dump Height	85 in (2159 mm)
Note	Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.

Bucket Width	74 in (1879.6 mm)
Maximum Material Density	3460 lb/yd
Rated Capacity	1 yd3 (0.8 m3)
Dump Height	85 in (2159 mm)
Note	Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.

Rated Bucket Capacity	1.2 yd3 (1 m3)
Rated Operating Load At Full Turn – Bucket	4019 lb (1823 kg)
Tire Size	340/80 R18
Straight Tipping Load – Bucket	9531 lb (4323.2 kg)
Rated Operating Load At Full Turn – Forks (En 474-3:2006, Firm And Level Ground, 1.25 Stability And 500 Mm [20 In] Load Center)	5226 lb (2370.5 kg)
Breakout Force – Bucket	11240 lb ft (15239.4 Nm)
Full Turn Static Tipping Load – Bucket	8038 lb (3646 kg)
Rack Back – Transport Position	52 degrees
Note	Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, ISO coupler and general purpose bucket (GP).

Rated Bucket Capacity	1.2 yd3 (1 m3)
Rated Operating Load At Full Turn – Bucket	3763 lb (1706.9 kg)
Tire Size	340/80 R18
Straight Tipping Load – Bucket	8946 lb (4057.9 kg)
Rated Operating Load At Full Turn – Forks (En 474-3:2006, Firm And Level Ground, 1.25 Stability And 500 Mm [20 In] Load Center)	4974 lb (2256.2 kg)
Breakout Force – Bucket	8983 lb ft (12179.4 Nm)
Full Turn Static Tipping Load – Bucket	7529 lb (3415.1 kg)
Rack Back – Transport Position	53 degrees
Note	Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, SSL coupler and general purpose bucket (GP).