Contents
Bucket
| Dump Clearance At Max Raise | 8.34 ft in (2540 mm) |
| Bucket Width | 6.76 ft in (2060 mm) |
| Bucket Capacity – Heaped | 1.44 yd3 (1.11 m3) |
Dimensions
| Ground Clearance | 1.12 ft in (340 mm) |
| Length With Bucket On Ground | 18.9 ft in (5760 mm) |
| Width Over Tires | 6.52 ft in (1985 mm) |
| Height To Top Of Cab | 8.7 ft in (2650 mm) |
| Wheelbase | 7.12 ft in (2170 mm) |
| Hinge Pin – Max Height | 11.19 ft in (3410 mm) |
| Reach At Max Lift And Dump | 2.81 ft in (855 mm) |
| Wheel Base | 7.1 ft in (2.17 m) |
| Hinge Pin Height | 11.2 ft in (3.42 m) |
| Machine Height | 8.7 ft in (2.66 m) |
Engine Details
| Engine Make | CAT |
| Engine Model | C3.4 |
| Net Power | 79 hp (59 kw) |
| Gross Power | 83 hp (61.9 kw) |
| Power Measured @ | 2500 rpm |
| Displacement | 203 cu in (3.4 L) |
| Iso 9249 Rating | 80 hp (59.7 kw) |
| Eec 80/1269 Rating | 80 hp (59.7 kw) |
| Sae J1349 Rating | 79 hp (59 kw) |
Operational Specs
| Operating Weight | 14252.9 lb (6465 kg) |
| Fuel Tank Capacity | 20.7 gal (78 L) |
| Hydraulic System Fluid Capacity | 22.2 gal (84 L) |
| Engine Oil Fluid Capacity | 2.7 gal (10 L) |
| Cooling System Fluid Capacity | 6.4 gal (24 L) |
| Static Tipping Weight | 10524.9 lb (4774 kg) |
| Turning Radius | 7.5 ft in (2280 mm) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 90 amps |
| Tire Size | 405/70 R20 |
Transmission
| Transmission Type | Hydrostatic |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed – Forward | 12.5 mph (20 km/h) |
| Max Speed – Reverse | 12.5 mph (20 km/h) |
| Travel Speed 1 | 4.3 mph (7 km/h) |
| Travel Speed 2 | 12.4 mph (20 km/h) |
| High Speed | 21.7 mph (35 km/h) |
Weights
| Operating Weight | 14253 lb (6465.1 kg) |
Buckets
| Bucket Capacities | 1.1 – 1.5 m3 1.4 – 2.0 yd3 |
Hydraulic System
| Relief Valve Setting | 3400 psi (23442.2 kPa) |
| Pump Flow Capacity | 22 gal/min (83 L/min) |
| Raise Time | 5 sec |
| Dump Time | 2 sec |
| Lower Time | 4 sec |
| Hydraulic Cycle Time – Dump | 2 Seconds |
| Hydraulic Cycle Time – Lift | 5 Seconds |
| Hydraulic Cycle Time – Rackback | 2.5 Seconds |
| Main Relief | 3400 psi |
| Hydraulic Cycle Time – Lower, Float | 4 Seconds |
| 3rd Auxiliary Flow – High Flow | 33 gal/min |
| 3rd Auxiliary Flow – Standard | 22 gal/min |
Operating Specifications
| Breakout Force | 10566 lb (4792.7 kg) |
| Rated Bucket Capacity | 1.4 yd3 (1.1 m3) |
| Tire Size | 405/70 R20 |
| Full Turn Static Tipping Load – Bucket | 7510 lb (3406.5 kg) |
| Rack Back – Transport Position | 52 degrees |
| Straight Tipping Load – Bucket | 10522 lb (4772.7 kg) |
| Rated Operating Load At Full Turn – Forks (En 474-3:2006, Firm And Level Ground, 500 Mm (20 In) Load Center, Transport 100 Mm (4 In) Above Ground) | 6592 lb (2990.1 kg) |
| Rated Operating Load At Full Turn – Forks (En 474-3:2006, Firm And Level Ground, 500 Mm (20 In) Load Center) (80% Of Ftstl) | 5192 lb (2355.1 kg) |
| Rated Operating Load At Full Turn – Forks (En 474-3:2006, Rough Terrain, 500 Mm (20 In) Load Center) (60% Of Ftstl) | 3893 lb (1765.9 kg) |
| Rated Operating Load At Full Turn | 3756 lb (1703.7 kg) |
Service Refill Capacities
| Cooling System | 6.3 gal (23.9 L) |
| Fuel Tank Capacity | 20.6 gal (78 L) |
| Hydraulic System | 22.2 gal (84.1 L) |
| Engine Oil | 2.6 gal (9.9 L) |
Cab
| ROPS | SAE J1040 MAY94, ISO 3471-1994 |
| FOPS | SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II |
Engine Dimensions
| Bore | 3.7 in (94 mm) |
| Stroke | 4.7 in (119.4 mm) |
| Displacement | 203 cu in (3.4 L) |
