Contents
- Dimensions – With Iso Coupler – Approximate
- Dimensions – With Ssl Coupler – Approximate
- Engine Details
- Drive Train
- Operational Specs
- Steering
- Weights
- Tires
- Weights
- Tires
- Buckets
- Hydraulic System
- Operating Specifications
- Service Refill Capacities
- Cab
- Loader Hydraulic System
- Maximum Material Densities – General Purpose Bucket
- Maximum Material Densities – Light Material Bucket
- Maximum Material Densities – Multi Purpose Bucket
- Operating Specifications – Iso Coupler
- Operating Specifications – Ssl Coupler
- Travel Speeds
- Cab Features – Canopy
- Cab Features – Comfort Cab
- Cab Features – Deluxe Cab
- Dimensions With Bucket (Approximate) – Standard Lift – With Iso Coupler
- Dimensions With Bucket (Approximate) – Standard Lift – With Ssl Coupler
Dimensions – With Iso Coupler – Approximate
| Ground Clearance | 13 in (330.2 mm) |
| Maximum Fork Height | 10.9 ft in (3.33 m) |
| Cab Height | 8.7 ft in (2.66 m) |
| Fork Height At Maximum Reach | 4.8 ft in (1.47 m) |
| Maximum Reach | 4.3 ft in (1.32 m) |
| Dig Depth | 3.9 in (99.06 mm) |
| Overall Length – With Bucket | 18.5 ft in (5.64 m) |
| Overall Length – With Forks | 19.7 ft in (6.01 m) |
| Fork Reach At Maximum Height | 1.5 ft in (0.46 m) |
| Reach At Ground Level | 2.6 ft in (0.8 m) |
| Fork Depth Below Ground | 2.8 in (71.12 mm) |
| Maximum Dump Height | 8.6 ft in (2.63 m) |
| Reach At Maximum Dump Height | 2.5 ft in (0.77 m) |
| Articulation Angle – Degrees | 39 |
| Tire Gauge | 5.2 ft in (1.59 m) |
| Hinge Pin At Maximum Height | 11.2 ft in (3.42 m) |
| Turning Radius – Inside Tire | 6.8 ft in (2.08 m) |
| Dump Angle At Maximum Height – Degrees | 45 |
| Turning Radius – Over Bucket | 14.9 ft in (4.55 m) |
| Load Over Height | 10.5 ft in (3.21 m) |
| Wheel Base | 7.1 ft in (2.17 m) |
| Departure Angle – Degrees | 33 |
| Width – Over Bucket | 6.8 ft in (2.08 m) |
| Machine Width | 6.5 ft in (1.99 m) |
Dimensions – With Ssl Coupler – Approximate
| Ground Clearance | 13 in (330.2 mm) |
| Overall Length – With Bucket | 18.9 ft in (5.77 m) |
| Cab Height | 8.7 ft in (2.66 m) |
| Departure Angle – Degrees | 33 |
| Dig Depth | 3.7 in (93.98 mm) |
| Dump Angle At Maximum Height – Degrees | 45 |
| Fork Depth Above Ground | 1.2 in (30.48 mm) |
| Fork Height At Maximum Reach | 5 ft in (1.53 m) |
| Fork Reach At Maximum Height | 1.9 ft in (0.58 m) |
| Hinge Pin At Maximum Height | 11.2 ft in (3.42 m) |
| Load Over Height | 10.5 ft in (3.21 m) |
| Machine Width | 6.5 ft in (1.99 m) |
| Maximum Dump Height | 8.31 ft in (2.53 m) |
| Maximum Fork Height | 10.8 ft in (3.3 m) |
| Maximum Reach | 4.7 ft in (1.44 m) |
| Articulation Angle – Degrees | 39 |
| Overall Length – With Forks | 20.2 ft in (6.16 m) |
| Reach At Ground Level | 3 ft in (0.92 m) |
| Reach At Maximum Dump Height | 2.8 ft in (0.86 m) |
| Tire Gauge | 5.2 ft in (1.59 m) |
| Turning Radius – Inside Tire | 6.8 ft in (2.08 m) |
| Turning Radius – Over Bucket | 15 ft in (4.58 m) |
| Wheel Base | 7.1 ft in (2.17 m) |
| Width – Over Bucket | 6.75 ft in (2.06 m) |
Engine Details
| Net Power | 74 hp (55.2 kw) |
| Displacement | 201 cu in (3.3 L) |
| Bore | 3.7 in (94 mm) |
| Stroke | 4.7 in (119.4 mm) |
| Emissions | *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards. |
| Engine Model | Cat C3.3B DIT* |
| Note (1) | Net power ratings are tested at the reference conditions for the specified standard. |
| Note (2) | Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed. |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Note (4) | Flywheel per the SAE reference conditions with the fan at maximum speed. |
| Note | *Meets U.S. EPA Tier 4 Final/EU Stage IIIB (M Series) or Tier 4 Interim/Stage IIIA (M Series [EUSO]) emission standards. |
| Maximum Gross Power – Sae J1995 | 74 hp (55.2 kw) |
| Maximum Net Power – Sae J1349 | 68 hp (50.8 kw) |
| Maximum Gross Power – Iso 14396 | 73 hp (54.5 kw) |
| Rated Net Power – 2,500 Rpm – Sae J1349 | 68 hp (50.8 kw) |
| Maximum Net Power – Iso 9249 | 69 hp (51.5 kw) |
| Maximum Gross Power | 73 hp (54.5 kw) |
| Maximum Gross Power – Iso 14396 (Din) | 74 hp (55.2 kw) |
| Maximum Gross Torque – Iso 14396 | 192 lb ft (260.4 Nm) |
| Maximum Net Torque – Sae J1349 | 189 lb ft (256.3 Nm) |
| Maximum Net Torque – Iso 9249 (1977)/Eec 80/1269 | 191 lb ft (259 Nm) |
| Note (5) | The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions. |
| Rated Net Power – 2,400 Rpm – Sae J1349 | 73 hp (54.5 kw) |
| Rated Net Power – 2,400 Rpm – Iso 9249 (1977)/Eec 80/1269 | 74 hp (55.2 kw) |
Drive Train
| Forward – Range 1 | 6 mph (9.7 km/h) |
| Forward – Range 2 | 12 mph (19.4 km/h) |
| Forward – High Range | 22 mph (35.5 km/h) |
| Reverse – Range 1 | 6 mph (9.7 km/h) |
| Reverse – Range 2 | 12 mph (19.4 km/h) |
| Reverse – High Range | 22 mph (35.5 km/h) |
Operational Specs
| Operating Weight | 14032 lb (6364.9 kg) |
Steering
| Maximum Working Pressure – Steering Pump | 3191 psi |
| Steering Articulation Angle – Each Direction | 39 degrees |
| Steering Cylinder, Double Acting – Bore Diameter | 3.1 in (78.8 mm) |
| Steering Cylinder, Double Acting – Rod Diameter | 1.4 in (35.6 mm) |
| Steering Cylinder, Double Acting – Stroke | 11.8 in (299.8 mm) |
| Nominal Flow – Steering Pump | 12 gal/min |
| Maximum Steering Torque – 0 Degrees (Straight Machine) | 42506 lb ft (57630.4 Nm) |
| Maximum Steering Torque – 39 Degrees (Full Turn) | 31398 lb ft (42570 Nm) |
| Steering Ac Cycle Times – Full Left To Full Right – 2,620 Rpm | 3 s |
| Number Of Steering Wheel Turns – Full Left To Full Right Or Full Right To Full Left | <6 turns |
Weights
| Operating Weight | 14032 lb (6364.9 kg) |
Tires
| Note (1) | Other tire choices available, contact your Cat dealer for details. |
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tires’ tonnes-km/h (ton-mph) capabilities. |
Weights
| Note | Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. – 908M is configured with a 1.1 m3 (1.44 yd3) bucket with bolt-on cutting edge. |
Tires
| Note (3) | CAT recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Option (1) | 360/80 R20 TRI2 Nokian |
| Option (2) | 375/75 R20 XZSL Michelin |
| Option (3) | 400/70 R20 XMCL Michelin |
| Option (4) | 400/70 R20 Bibload Michelin |
| Option (5) | 405/70 R20 SPT9 Dunlop |
| Option (6) | 12.5-20 ATU Firestone |
Buckets
| Bucket Capacities | 0.9 m3-1.5 m3 (1.2 yd3-2.0 yd3) |
| Bucket Capacities – Iso Coupler | 0.9-1.5 m3 |
| Bucket Capacities – Ssl Style Coupler | 1.2-2.0 yd3 |
| General Purpose | 1.1-1.3 m3 (1.44-1.7 yd3) |
| Light Material | 2 yd3 (1.5 m3) |
Hydraulic System
| Hydraulic Cycle Time – Dump | 1.3 s |
| Main Relief – 3rd Aux Flow: Standard | 22 gal/min |
| Main Relief – 3rd Aux Flow | 3400 psi |
| Main Relief – 3rd Aux Flow: High Flow | 34 gal/min |
| Hydraulic Cycle Time – Lift | 5.2 s |
| Hydraulic Cycle Time – Rackback | 2.1 s |
| Hydraulic Cycle Time – Lower | 3.2 s |
Operating Specifications
| Rated Bucket Capacity | 1.4 yd3 (1.1 m3) |
| Full Turn Tipping Load | 8311 lb (3769.9 kg) |
| Tipping Load – Straight – Iso 14397-1 | 9757 lb (4425.8 kg) |
| Tipping Load – Full Turn – Iso 14397-1 | 7947 lb (3604.7 kg) |
| Clearance – Full Lift And 45 Degrees Dump | 8 ft in (2.5 m) |
| Reach – Full Lift And 45 Degrees Dump | 3 ft in (1 m) |
| Steering Articulation Angle – Each Direction | 39 degrees |
Service Refill Capacities
| Cooling System | 4.4 gal (16.7 L) |
| Fuel Tank Capacity | 20.6 gal (78 L) |
| Hydraulic Tank | 12.2 gal (46.2 L) |
| Hydraulic System – Including Tank | 19 gal (72 L) |
| Engine Crankcase | 3 gal (11.4 L) |
| Transmission – Gear Box | 2.9 gal (11 L) |
| Hydraulic System | 18.5 gal (70.1 L) |
| Engine Oil | 3 gal (11.4 L) |
Cab
| ROPS | SAE J1040 MAY94, ISO 3471-1994. |
| FOPS | SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. |
| Note (1) | Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A) typical. |
Loader Hydraulic System
| Lift Cylinder, Double Acting – Stroke | 27.5 in (698.5 mm) |
| Tilt Cylinder, Double Acting – Stroke | 16.4 in (416.6 mm) |
| Maximum Flow – Implement Pump | 22 gal/min |
| 3rd Function Maximum Working Pressure | 3408 psi |
| Maximum Working Pressure – Implement Pump | 3408 psi |
| Relief Pressure – Tilt Cylinder Rod | 2756 psi |
| Boost Flow Maximum Pressure | 3191 psi |
| Lift Cylinder, Double Acting – Bore Diameter | 3.3 in (83.9 mm) |
| Lift Cylinder, Double Acting – Rod Diameter | 2 in (50.8 mm) |
| Tilt Cylinder, Double Acting – Bore Diameter | 3.9 in (99.1 mm) |
| Tilt Cylinder, Double Acting – Rod Diameter | 2.2 in (55.9 mm) |
| Hydraulic Cycle Time – 1,800 Rpm – Raise, Ground Level To Maximum Lift | 5.5 s |
| Hydraulic Cycle Time – 1,800 Rpm – Dump, At Maximum Lift Height | 1.5 s |
| Hydraulic Cycle Time – 1,800 Rpm – Float Down, Maximum Lift To Ground Level | 2.6 s |
| Hydraulic Cycle Time – 1,800 Rpm – Total Cycle Time | 9.6 s |
| Hydraulic Cycle Time – 1,000 Rpm – Raise, Ground Level To Maximum Lift | 9.6 s |
| Hydraulic Cycle Time – 1,000 Rpm – Dump, At Maximum Lift Height | 3 s |
| Hydraulic Cycle Time – 1,000 Rpm – Float Down, Maximum Lift To Ground Level | 2.6 s |
| Maximum Flow – Implement Pump – Auxiliary Function Standard Flow | 22 gal/min |
| Maximum Flow – Implement Pump – Auxiliary Function High Flow | 33 gal/min |
| Relief Pressure – Tilt Cylinder Head | 4496 psi |
Maximum Material Densities – General Purpose Bucket
| Bucket Width | 81 in (2057.4 mm) |
| Maximum Material Density | 2611 lb/yd |
| Rated Capacity | 1.4 yd3 (1.1 m3) |
| Dump Height | 100 in (2540 mm) |
Maximum Material Densities – Light Material Bucket
| Bucket Width | 82 in (2082.8 mm) |
| Maximum Material Density | 1743 lb/yd |
| Rated Capacity | 2 yd3 (1.6 m3) |
| Dump Height | 92 in (2336.8 mm) |
Maximum Material Densities – Multi Purpose Bucket
| Bucket Width | 81 in (2057.4 mm) |
| Maximum Material Density | 3251 lb/yd |
| Rated Capacity | 1.2 yd3 (1 m3) |
| Dump Height | 104 in (2641.6 mm) |
Operating Specifications – Iso Coupler
| Rated Bucket Capacity | 1.4 yd3 (1.1 m3) |
| Rated Operating Load At Full Turn – Bucket | 4438 lb (2013.1 kg) |
| Tire Size | 405/70 R20 |
| Straight Tipping Load – Bucket | 10891 lb (4940.1 kg) |
| Rated Operating Load At Full Turn – Forks (En 474-3:2006, Firm And Level Ground, 1.25 Stability And 500 Mm [20 In] Load Center) | 5561 lb (2522.5 kg) |
| Breakout Force – Bucket | 13712 lb ft (18591 Nm) |
| Full Turn Static Tipping Load – Bucket | 8874 lb (4025.2 kg) |
| Rack Back – Transport Position | 52 |
Operating Specifications – Ssl Coupler
| Rated Bucket Capacity | 1.4 yd3 (1.1 m3) |
| Rated Operating Load At Full Turn – Bucket | 4156 lb (1885.2 kg) |
| Tire Size | 405/70 R20 |
| Straight Tipping Load – Bucket | 10207 lb (4629.9 kg) |
| Rated Operating Load At Full Turn – Forks (En 474-3:2006, Firm And Level Ground, 1.25 Stability And 500 Mm [20 In] Load Center) | 5192 lb (2355.1 kg) |
| Breakout Force – Bucket | 10566 lb ft (14325.6 Nm) |
| Full Turn Static Tipping Load – Bucket | 8311 lb (3769.9 kg) |
| Rack Back – Transport Position | 52 |
Travel Speeds
| Speed 1 | 6.2 mph (10 km/h) |
| Speed 2 | 12.4 mph (20 km/h) |
| High Speed | 21.7 mph (35 km/h) |
Cab Features – Canopy
| External Knock Back Mirrors | Standard |
| Lockable Storage Box | Standard |
| Sun Visor | Standard |
| Cup Holder | Standard |
| Vinyl Suspension Seat | Standard |
| Adjustable Internal Mirror | Standard |
| Coat Hook | Standard |
| Fixed Steering Column | Standard |
Cab Features – Comfort Cab
| Left Window – Sliding | Standard |
| Cat Radio/Cd/Mp3/Wma/Aux | Optional |
| Sun Visor | Standard |
| Heater | Standard |
| Heated Rear Window | Standard |
| Adjustable Steering Column | Standard |
| Cup Holder | Standard |
| Air Conditioner | Optional |
| Lockable Storage Box | Standard |
| Cloth Suspension Seat, Arm Rest | Standard |
| Coat Hook | Standard |
| External Knock Back Mirrors | Standard |
| Radio-Ready Kit (Wiring, Speaker, Aerial And Grilles) | Optional |
| Rear Blind | Optional |
| Two Access Doors | Standard |
| Adjustable Internal Mirror | Standard |
| Cabin Light | Standard |
| Machine Security System | Optional |
Cab Features – Deluxe Cab
| Air Conditioner | Optional |
| Machine Security System | Optional |
| Cat Radio/Cd/Mp3/Wma/Aux | Optional |
| Adjustable Internal Mirror | Standard |
| Rear Blind | Optional |
| Adjustable Steering Column | Standard |
| Heated Rear Window | Standard |
| Coat Hook | Standard |
| External Knock Back Mirrors | Standard |
| Cloth, Electric Air Suspension, Arm/Head Rest, Lumbar Support And Heated Back Seat | Standard |
| Cup Holder | Standard |
| Lockable Storage Box | Standard |
| Sun Visor | Standard |
| Two Access Doors | Standard |
| Left Window – Sliding | Standard |
| Cabin Light | Standard |
| Heater | Standard |
| Radio-Ready Kit (Wiring, Speaker, Aerial And Grilles) | Standard |
| Right Window – Sliding | Standard |
Dimensions With Bucket (Approximate) – Standard Lift – With Iso Coupler
| Height – Ground To Cab** | 8.7 ft in (2.7 m) |
| Height – Ground Clearance** | 1.1 ft in (0.4 m) |
| Length – Wheel Base | 7.1 ft in (2.2 m) |
| Length – Overall* | 18.5 ft in (5.7 m) |
| Reach – Bucket At 45 Degrees* | 2.5 ft in (0.8 m) |
| Dig Depth** | 3.9 in (99.1 mm) |
| Clearance – Bucket At 45 Degrees * | 8.6 ft in (2.7 m) |
| Clearance – Level Bucket** | 10.5 ft in (3.3 m) |
| Height – Bucket Pin** | 11.2 ft in (3.5 m) |
| Width – Bucket | 6.8 ft in (2.1 m) |
| Width – Tread Center | 5.1 ft in (1.6 m) |
| Turning Radius – Over Bucket | 14.9 ft in (4.6 m) |
| Turning Radius – Inside Of Tires | 6.8 ft in (2.1 m) |
| Machine Width | 6.5 ft in (2 m) |
| Dump Angle At Full Lift | 45 degrees |
| Departure Angle | 33 degrees |
| Articulation Angle | 39 degrees |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
Dimensions With Bucket (Approximate) – Standard Lift – With Ssl Coupler
| Height – Ground To Cab** | 8.7 ft in (2.7 m) |
| Height – Ground Clearance** | 1.1 ft in (0.4 m) |
| Length – Wheel Base | 7.1 ft in (2.2 m) |
| Length – Overall* | 19 ft in (5.8 m) |
| Reach – Bucket At 45 Degrees* | 2.9 ft in (0.9 m) |
| Dig Depth** | 4.2 in (106.7 mm) |
| Clearance – Bucket At 45 Degrees * | 8.2 ft in (2.5 m) |
| Clearance – Level Bucket** | 10.5 ft in (3.3 m) |
| Height – Bucket Pin** | 11.2 ft in (3.5 m) |
| Width – Bucket | 6.8 ft in (2.1 m) |
| Width – Tread Center | 5.1 ft in (1.6 m) |
| Turning Radius – Over Bucket | 14.9 ft in (4.6 m) |
| Turning Radius – Inside Of Tires | 6.8 ft in (2.1 m) |
| Machine Width | 6.5 ft in (2 m) |
| Dump Angle At Full Lift | 45 degrees |
| Departure Angle | 33 degrees |
| Articulation Angle | 39 degrees |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
