Contents
Engine Details
| Net Power | 96 hp (71.6 kw) |
| Displacement | 231.8 cu in (3.8 L) |
| Peak Torque | 248 lb ft (336.3 Nm) |
| Torque Rise | 17 % |
| Bore | 3.9 in (99.1 mm) |
| Stroke | 4.7 in (119.4 mm) |
| Engine Model | Cat C3.8 Turbo |
| Note | Engine meets U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards. |
| Maximum Gross Power – Sae J1995 | 97 hp (72.4 kw) |
| Maximum Gross Power – Iso 14396 | 97 hp (72.4 kw) |
| Maximum Gross Power | 97 hp (72.4 kw) |
| Rated Net Power – Sae J1349 | 92 hp (68.7 kw) |
| Rated Net Power – Iso 9249/Eec | 96 hp (71.6 kw) |
| Rpm At Rated Power | 2400 rpm |
| Rated Torque | 237 lb ft (321.4 Nm) |
| Rpm At Peak Torque | 1500 rpm |
Operational Specs
| Operating Weight | 17910 lb (8123.9 kg) |
Power Train
| Front Axle | Fixed |
| Rear Axle | Oscillating |
| Type (1) | Power train is fully hydrostatic, operating with twin motors on a gear reduction system to amplify torque. |
| Type (2) | A built-in clutch on one motor de-clutches at higher speeds to gain maximum travel speed. |
| Front Axle – Traction Aid | Locking differential |
| Rear Axle – Oscillation | 11 degrees |
| Rear Axle – Traction Aid | Locking differential |
| Brakes – Service Brakes | Inboard wet disc |
| Brakes – Park Brake | Cable applied, spring release |
Steering
| Steering Type | Steering system uses a dedicated pump with dual double acting cylinders. |
| Maximum Working Pressure – Steering Pump | 3263 psi |
| Steering Articulation Angle – Each Direction | 40 degrees |
| Steering Cylinder, Double Acting – Bore Diameter | 2.4 in (61 mm) |
| Steering Cylinder, Double Acting – Rod Diameter | 1.4 in (35.6 mm) |
| Steering Cylinder, Double Acting – Stroke | 15.7 in (398.8 mm) |
| Maximum Steering Torque – 0 Degrees (Straight Machine) | 27369 lb ft (37107.4 Nm) |
| Maximum Steering Torque – 39 Degrees (Full Turn) | 21593 lb ft (29276.2 Nm) |
| Steering Cycle Times – Stop To Stop – At 2,400 Rpm Engine Speed, 90 Rpm Steering Wheel Speed | 2.8 s |
| Number Of Steering Wheel Turns – Stop To Stop, Turning Wheel At > 67 Rpm | 3.75 turns |
| Number Of Steering Wheel Turns – Stop To Stop, Turning Wheel At < 27 Rpm | 5.75 turns |
| Maximum Flow – Steering Pump | 22.2 gal/min |
Transmission
| Type (2) | Creeper control allows maximum speed range adjustability from 0 to 10 km/h (6 mph) in Speed Range 1. |
| Type (1) | Changing from Low Range to High Range is on-the-go for added convenience. |
| Forward – Low Range, Speed Range 1 | 6.3 mph (10.2 km/h) |
| Forward – Low Range, Speed Range 2 | 12.5 mph (20.2 km/h) |
| Forward – High Range | 25 mph (40.3 km/h) |
| Reverse – Low Range, Speed Range 1 | 6.3 mph (10.2 km/h) |
| Reverse – Low Range, Speed Range 2 | 12.5 mph (20.2 km/h) |
| Reverse – High Range | 25 mph (40.3 km/h) |
Weights
| Operating Weight | 17910 lb (8123.9 kg) |
Tires
| Note | Wheel sets are interchangeable between the 910K and 914K. |
Weights
| Operating Weight – Standard Lift | 17910 lb (8123.9 kg) |
| Operating Weight – High Lift | 18030 lb (8178.3 kg) |
Tires
| Tire Size – Standard | 17.5-25 12PR |
| Tire Size – Optional (1) | 17.5-R25 |
| Tire Size – Optional (2) | 17.5-25 16PR |
| Tire Size – Non-Pneumatic – Flexport | 53.5916.5 (15.5/17.525 equivalent) |
Buckets
| Bucket Capacities | 1.2 m3-2.5 m3 (1.6 yd3-3.3 yd3) |
| General Purpose | 1.2-1.5 m3 (1.6-2.0 yd3) |
| Buckets Type | Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention. |
Operating Specifications
| Rated Bucket Capacity | 3.3 yd3 (2.6 m3) |
| Clearance – Full Lift And 45 Degrees Dump | 112 ft in (34.2 m) |
| Reach – Full Lift And 45 Degrees Dump | 31 ft in (9.5 m) |
| Steering Articulation Angle – Each Direction | 40 degrees |
| Full Turn Tip Load | 12294 lb (5576.5 kg) |
| Full Turn Tipping Load – Standard Lift | 10538 lb (4780 kg) |
| Full Turn Tipping Load – High Lift | 8603 lb (3902.3 kg) |
Service Refill Capacities
| Cooling System | 4.4 gal (16.7 L) |
| Fuel Tank Capacity | 39.6 gal (150 L) |
| Engine Crankcase | 3.4 gal (12.9 L) |
| Transmission – Gear Box | 0.9 gal (3.3 L) |
| Hydraulic System | 22.5 gal (85.2 L) |
| Hydraulic Tank – Refill | 15.9 gal (60.2 L) |
| Axle – Front, Center | 2 gal (7.5 L) |
| Axle – Front, Each Hub | 0.6 gal (2.2 L) |
| Axle – Rear, Center | 2 gal (7.5 L) |
| Axle – Rear, Each Hub | 0.6 gal (2.2 L) |
Cab
| ROPS | ROPS: SAE J1040 MAY94, ISO 3471-1994. |
| FOPS | FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. |
| Sound | The declared dynamic operator sound pressure level per ISO 6396:2008 is: – Deluxe cab: 75 dB(A) |
Loader Hydraulic System
| Maximum Working Pressure – Implement Pump | 3046 psi |
| Main Relief Pressure | 4061 psi |
| Maximum Pump Flow | 33 gal/min |
| Maximum Flow – Implement Pump – 3rd Function | 25 gal/min |
| Maximum Flow – Implement Pump – 4th Function | 25 gal/min |
| Cycle Time – Lift | 5.3 s |
| Cycle Time – Dump | 1.8 s |
| Cycle Time – Rackback | 2.4 s |
| Cycle Time – Float | 3.7 s |
| Cycle Time – Lower, Float | 4 s |
| Lift Cylinder – Bore Diameter | 3.9 in (99.1 mm) |
| Lift Cylinder – Rod Diameter | 2.4 in (61 mm) |
| Lift Cylinders – Stroke | 23.3 in (591.9 mm) |
| Tilt Cylinder – Bore Diameter | 3.9 in (99.1 mm) |
| Tilt Cylinder – Rod Diameter | 2.4 in (61 mm) |
| Tilt Cylinder – Stroke | 22.8 in (579.2 mm) |
