CAT 924F Wheel Loader

Bucket

Dump Clearance At Max Raise 8.86 ft in (2700 mm)
Bucket Capacity – Struck 1.84 yd3 (1.4 m3)
Bucket Capacity – Heaped 2.23 yd3 (1.7 m3)
Bucket Width 7.86 ft in (2395 mm)

Dimensions

Length With Bucket On Ground 21.41 ft in (6524 mm)
Width Over Tires 7.64 ft in (2328 mm)
Height To Top Of Cab 10.29 ft in (3136 mm)
Wheelbase 8.86 ft in (2700 mm)
Hinge Pin – Max Height 11.78 ft in (3590 mm)
Reach At Max Lift And Dump 2.81 ft in (855 mm)
Width – Over Tires 7.65 ft in (2.34 m)
Rack Back Angle – Carry 45 degrees
Bucket Pin Height – Maximum Lift 11.78 ft in (3.6 m)
Overall Height 10.3 ft in (3139.44 mm)
Height – Top Of ROPS/FOPS 10.29 ft in (3.14 m)
Wheel Base 8.81 ft in (2.69 m)

Engine Details

Number Of Cylinders 4
Engine Make CAT
Engine Model 3114
Net Power 105 hp (78.3 kw)
Gross Power 111 hp (82.8 kw)
Power Measured @ 2400 rpm
Displacement 268 cu in (4.4 L)
Aspiration Turbocharged
Rated Net Power 105 hp (78.3 kw)

Operational Specs

Operating Weight 19896.8 lb (9025 kg)
Fuel Tank Capacity 41.5 gal (157 L)
Hydraulic System Fluid Capacity 20.4 gal (77 L)
Engine Oil Fluid Capacity 2.7 gal (10 L)
Cooling System Fluid Capacity 9.3 gal (35 L)
Transmission Fluid Capacity 6.1 gal (23 L)
Front Axle/Diff Fluid Capacity 5.6 gal (21 L)
Rear Axle/Diff Fluid Capacity 5.6 gal (21 L)
Static Tipping Weight 15879.9 lb (7203 kg)
Rear Axle Oscillation 24 degrees
Tire Size 17.5-25

Transmission

Transmission Type Powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 23.9 mph (38.5 km/h)
Max Speed – Reverse 14.8 mph (23.9 km/h)
Forward – 1 4.5 mph (7.1 km/h)
Reverse – 1 4.5 mph (7.1 km/h)

Steering

Minimum Turning Radius – Over Tires 201 in (5104.9 mm)
Steering Articulation 40 degrees

Transmission

2 8.2 mph (13.2 km/h)
3 14.7 mph (23.6 km/h)
4 23.8 mph (38.3 km/h)

Weights

Operating Weight 20081 lb (9108.6 kg)

Tires

Tread Width 6.1 ft in (1.9 m)
Size 17.5-25

Weights

Optional Counterweight 566 lb (256.8 kg)

Buckets

Bucket Width 7.8 ft in (2.4 m)

Hydraulic System

Relief Valve Setting 3600 psi (24821.2 kPa)
Pump Flow Capacity 34.9 gal/min (132 L/min)
Raise Time 4.3 sec
Dump Time 1.3 sec
Lower Time 2.7 sec

Axles

Axle Oscillation 12 degrees

Operating Specifications

Static Tipping Load – Full Turn 13885 lb (6298.2 kg)
Breakout Force 21067 lb (9555.9 kg)
Articulation Angle 40 degrees
Reach – Full Lift And 45 Degrees Dump 2.8 ft in (0.9 m)
Dump Clearance At Full Lift And 45 Degrees Dump Angle 8.8 ft in (2.7 m)
Bucket Capacity – With Bolt-On Cutting Edge 1.8 yd3 (1.4 m3)

Service Refill Capacities

Cooling System 9.3 gal (35.1 L)
Fuel Tank Capacity 41.5 gal (157.1 L)
Crankcase 2.7 gal (10 L)
Hydraulic Tank 14 gal (53 L)
Hydraulic System – Including Tank 20.4 gal (77 L)
Transmission 6.1 gal (23.1 L)
Front 5.6 gal (21.1 L)
Rear 5.6 gal (21.1 L)

Loader Hydraulic System

Pump Flow – Implement Pump 35 gal/min
Raise 4.3 s
Dump 1.3 s
Lower, Empty, Float Down 2.7 s
Total 8.3 s
Hydraulic Cycle Time 8.3 s
Relief Pressure – Implement Pump 3600 psi
Ask a question