CAT 924K Wheel Loader

Dimensions

Ground Clearance 1.25 ft in (381 mm)
Carry Height 1.5 ft in (0.46 m)
Centerline Of Front Axle To Hitch 4.91 ft in (1.5 m)
Digging Depth 3.8 in (96.52 mm)
Dump Angle At Maximum Lift 50 degrees
Dump Clearance At Maximum Lift – 45 Degrees 9.4 ft in (2.87 m)
Height – Center Of Axle 2.21 ft in (0.68 m)
Height – Top Of ROPS/FOPS 10.9 ft in (3.33 m)
Length – Rear Axle To Bumper 6.5 ft in (1.99 m)
Overall Height – Bucket Raised 16.61 ft in (5.06 m)
Overall Length 24.4 ft in (7437.12 mm)
Rack Back Angle – Carry 45 degrees
Rack Back Angle – Maximum Lift 54 degrees
Reach At Maximum Lift And 45 Degrees Dump 3.3 ft in (1.01 m)
Wheel Base Length 9.81 ft in (2.99 m)
Bucket Pin Height – Maximum Lift 12.75 ft in (3.89 m)
Width – Over Tires 8.33 ft in (2.54 m)

Engine Details

Displacement 402 cu in (6.6 L)
Net Torque 515 lb ft (698.3 Nm)
Bore 4 in (101.6 mm)
Stroke 5 in (127 mm)
Eec 80/1269 142 hp (105.9 kw)
Rated Net Power 141 hp (105.2 kw)
Sae J1349 141 hp (105.2 kw)
Iso 9249 (1997) 142 hp (105.9 kw)

Operational Specs

Operating Weight 28360 lb (12863.9 kg)

Transmission

Forward – 1 8 mph (12.9 km/h)
Reverse – 1 8 mph (12.9 km/h)

Steering

Steering Angle – Each Direction 40 degrees
Steering Cylinder, Two, Bore 2.8 in (71.2 mm)
Maximum Working Pressure 3500 psi
Steering Articulation 40 degrees

Transmission

2 8 mph (12.9 km/h)
3 17 mph (27.4 km/h)
4 25 mph (40.3 km/h)
Standard Transmission Maximum Travel Speeds 25 mph (40.3 km/h)

Tires

Size 20.5 R25 Radial (L-3)

Buckets

Bucket Capacities 1.9 m3 – 5.0 m3 2.5 yd3 – 6.5 yd3

Operating Specifications

Static Tipping Load – Full Turn 16352 lb (7417.2 kg)
Articulation Angle 40 degrees
Reach – Full Lift And 45 Degrees Dump 3.3 ft in (1 m)
Dump Clearance At Full Lift And 45 Degrees Dump Angle 9.4 ft in (2.9 m)

Service Refill Capacities

Cooling System 7.9 gal (30 L)
Fuel Tank Capacity 51.5 gal (195 L)
Crankcase 5.3 gal (20.1 L)
Hydraulic Tank 23.8 gal (90.1 L)
Hydraulic System – Including Tank 42.3 gal (160.2 L)
Transmission 2.2 gal (8.4 L)
Front 5.5 gal (20.9 L)
Rear 5.5 gal (20.9 L)

Cab

ROPS SAE J1040 MAY94, ISO 3471-1994
FOPS SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II

Loader Hydraulic System

Pump Flow – Implement Pump 40 gal/min
Maximum Working Pressure 3771 psi
Raise 5.5 s
Dump 1.5 s
Lower, Empty, Float Down 2.6 s
Total 9.6 s
Bore (1) 4.3 in (109.3 mm)
Stroke (1) 28.7 in (729 mm)
Bore (2) 5.1 in (129.6 mm)
Stroke (2) 21.9 in (556.3 mm)
Hydraulic Cycle Time 9.6 s
Ask a question