CAT 966H Wheel Loader

Bucket

Dump Clearance At Max Raise 10.17 ft in (3086 mm)
Breakout Force 42300 lb (188 kN)
Bucket Width 10.58 ft in (3220 mm)
Bucket Capacity – Heaped 5.5 yd3 (4.25 m3)
Bucket Capacity – Struck 4.74 yd3 (3.62 m3)

Dimensions

Ground Clearance 1.63 ft in (496.83 mm)
Length With Bucket On Ground 29.08 ft in (8855 mm)
Width Over Tires 9.67 ft in (2956 mm)
Height To Top Of Cab 11.83 ft in (3600 mm)
Wheelbase 11.32 ft in (3450 mm)
Hinge Pin – Max Height 13.86 ft in (4224 mm)
Reach At Max Lift And Dump 4.25 ft in (1294 mm)
Height – Top Of Exhaust Pipe 139.81 in (3550.92 mm)
Centerline Of Rear Axle To Hitch 67.92 in (1725.17 mm)
Centerline Rear Axle To Edge Of Counterweight 8.07 ft in (2.46 m)
B-Pin Height – Standard 13.86 ft in (4.23 m)
Height – Top Of Hood 105.48 in (2679.2 mm)
Height – Top Of ROPS 11.81 ft in (3.6 m)
Wheel Base 11.32 ft in (3.46 m)

Engine Details

Number Of Cylinders 6
Engine Make CAT
Engine Model C11 ACERT
Net Power 262 hp (195 kw)
Gross Power 286 hp (213 kw)
Power Measured @ 1800 rpm
Max Torque 896 lb ft (1215 Nm)
Displacement 677 cu in (11.1 L)
Torque Measured @ 1400 rpm
Aspiration Turbocharged
Torque Rise 38 %
Bore 5.2 in (130.1 mm)
Stroke 5.6 in (140 mm)
Net Power – Iso 9249 262 hp (195.4 kw)
Net Power – Sae J1349 259 hp (193.2 kw)
Net Power – 80/1269/Eec 262 hp (195.4 kw)
Gross Power – Sae J1995 286 hp (213.3 kw)
Engine Model Cat? C11 ACERT?
Flywheel Power 262 hp (195.4 kw)
Peak Torque – 1,400 Rpm – Net 896 lb ft (1214.9 Nm)

Operational Specs

Operating Weight 52254 lb (23698 kg)
Fuel Tank Capacity 100.4 gal (380 L)
Hydraulic System Fluid Capacity 29 gal (110 L)
Engine Oil Fluid Capacity 9.3 gal (35 L)
Cooling System Fluid Capacity 10.3 gal (39 L)
Transmission Fluid Capacity 11.7 gal (44 L)
Front Axle/Diff Fluid Capacity 16.9 gal (64 L)
Rear Axle/Diff Fluid Capacity 16.9 gal (64 L)
Static Tipping Weight 38354 lb (17394 kg)
Turning Radius 24.2 ft in (7367 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 80 amps
Rear Axle Oscillation 26 degrees
Tire Size 26.5-25

Transmission

Transmission Type Powershift
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed – Forward 23.2 mph (37.4 km/h)
Max Speed – Reverse 23.2 mph (37.4 km/h)
Forward – 1 4.2 mph (6.8 km/h)
Forward – 2 7.8 mph (12.6 km/h)
Forward – 3 13.7 mph (22.1 km/h)
Forward – 4 23.2 mph (37.4 km/h)
Reverse – 1 4.6 mph (7.5 km/h)
Reverse – 2 8.6 mph (13.9 km/h)
Reverse – 3 15.1 mph (24.4 km/h)
Reverse – 4 23.2 mph (37.4 km/h)

Weights

Operating Weight 52254 lb (23702.1 kg)

Tires

Tires Choose from a variety of tires to match your application.

Buckets

Maximum Bucket Capacity 5.5 yd3 (4.3 m3)
Bucket Capacities 3.4-4.2 m3 4.5-5.5 yd3
Bucket Width 10.4 ft in (3.2 m)
Capacity – Reference Bucket 4.6 yd3 (3.6 m3)
Type – Reference Bucket GP
Breakout Force – Reference Bucket 48558.8 lb (22025.9 kg)

Hydraulic System

Relief Valve Setting 1000 psi (6900 kPa)
Pump Flow Capacity 80.6 gal/min (305 L/min)
Raise Time 5.9 sec
Dump Time 1.6 sec
Lower Time 2.4 sec

Axles

Front Fixed front
Rear Oscillating +/- 13?

Hydraulic System

Pump Type Piston

Axles

Maximum Single-Wheel Rise And Fall 19.8 in (503 mm)

Hydraulic System

Hydraulic Cycle Time – Total 9.9 s
Hydraulic Cycle Time – Lower, Empty, Float Down 2.4 s
Hydraulic Cycle Time – Raise 5.9 s
Pilot System – Pump Output 84.54 gal/min
Hydraulic Cycle Time – Dump 1.6 s
Steering System – Pump Type Piston
Bucket/Work Tool System – Pump Output 80.6 gal/min

Brakes

Brakes Meets required standards.

Operating Specifications

Static Tipping Load – Full Turn 34120 lb (15476.6 kg)
Dump Clearance 9858.9 ft in (3005 m)
Breakout Force 42300 lb (19187 kg)

Service Refill Capacities

Cooling System 10.3 gal (39 L)
Crankcase 9.3 gal (35.1 L)
Hydraulic Tank 29 gal (109.8 L)
Fuel Tank – Standard 100.4 gal (380.1 L)
Transmission 11.7 gal (44 L)
Differential – Final Drives – Front 16.9 gal (64 L)
Differential – Final Drives – Rear 16.9 gal (64 L)

Cab

ROPS/FOPS Meets SAE and ISO standards.
Ask a question