CAT 982M Wheel Loader Specs, Weight & Dimensions

Contents

Dimensions – Standard Lift
Engine Details
Operational Specs
Transmission
Weights
Buckets
Axles
Hydraulic System
Brakes
Operating Specifications
Service Refill Capacities
Sound
Cab
Bucket Capacities
Engine – Tier 3/Stage Iiia Equivalent
Engine – Tier 4 Final/Stage Iv
Engine – Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent
Sound – Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent
Sound – Tier 4 Final/Stage Iv

Dimensions – Standard Lift

Ground Clearance	1.33 ft in (0.41 m)
Centerline Of Rear Axle To Edge Of Counterweight	8.92 ft in (2.72 m)
Centerline Of Rear Axle To Hitch	6.25 ft in (1.91 m)
Height – Top Of Exhaust Pipe	12.25 ft in (3.74 m)
Height – Top Of Hood	10.17 ft in (3.1 m)
Height – Top Of ROPS	12.5 ft in (3.81 m)
Hinge Pin Height At Carry	2.67 ft in (0.82 m)
Hinge Pin Height At Maximum Lift	15.5 ft in (4.73 m)
Lift Arm Clearance At Maximum Lift	12.67 ft in (3.87 m)
Maximum Width Over Tires	11.5 ft in (3.51 m)
Overall Length – Without Bucket	28.17 ft in (8.59 m)
Rack Back – Carry Height	48 degrees
Rack Back – Maximum Lift	57 degrees
Rack Back At Ground	42 degrees
Tread Width	8.33 ft in (2.54 m)
Note	All dimensions are approximate and based on Bridgestone 875/65R29 VLTS L4 radial tires.
Wheel Base	12.5 ft in (3.81 m)

Engine Details

Displacement	763 cu in (12.6 L)
Net Power – Iso 9249	398 hp (296.8 kw)
Engine Model	Cat C13 ACERT
Note	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Peak Gross Torque – 1,200 Rpm – Sae J1995	1627 lb ft (2206 Nm)
Peak Gross Torque – 1,200 Rpm – Iso 14396	1609 lb ft (2181.6 Nm)
Maximum Net Power – 1,700 Rpm – Iso 9249	398 hp (296.8 kw)
Maximum Net Torque – 1,100 Rpm	1518 lb ft (2058.2 Nm)
Maximum Power – 1,700 Rpm – Iso 14396	430 hp (320.7 kw)
Maximum Power – 1,700 Rpm – Iso 14396 – Metric	436 hp (325.2 kw)
Maximum Net Power – 1,700 Rpm – Iso 9249 – Metric	404 hp (301.3 kw)
Maximum Net Power – 1,700 Rpm – Sae J1349	398 hp (296.8 kw)
Maximum Net Power – 1,700 Rpm – Sae J1349 – Metric	404 hp (301.3 kw)
Maximum Power – 1,700 Rpm – Sae J1995	436 hp (325.2 kw)
Maximum Power – 1,700 Rpm – Sae J1995 – Metric	442 hp (329.6 kw)
Maximum Net Torque – 1,000 Rpm	1505 lb ft (2040.6 Nm)
Maximum Power – 1,800 Rpm – Iso 14396	406 hp (302.8 kw)
Maximum Power – 1,800 Rpm – Iso 14396 – Metric	412 hp (307.3 kw)
Maximum Power – 1,800 Rpm – Sae J1995	412 hp (307.3 kw)
Maximum Power – 1,800 Rpm – Sae J1995 – Metric	417 hp (311 kw)
Peak Gross Torque – 1,300 Rpm – Sae J1995	1617 lb ft (2192.4 Nm)
Maximum Net Power – 1,800 Rpm – Iso 9249	373 hp (278.2 kw)
Maximum Net Power – 1,800 Rpm – Sae J1349	373 hp (278.2 kw)
Maximum Net Power – 1,800 Rpm – Iso 9249 – Metric	378 hp (281.9 kw)
Maximum Net Power – 1,800 Rpm – Sae J1349 – Metric	378 hp (281.9 kw)
Peak Gross Torque – 1,300 Rpm – Iso 14396	1602 lb ft (2172.1 Nm)
U.S. Epa Tier 4 Final/Eu Stage Iv – Maximum Power – Sae J1995	436 hp (325.2 kw)
Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent: Maximum Power – Sae J1995	436 hp (325.2 kw)

Operational Specs

Operating Weight

78402 lb (35562.6 kg)

Transmission

Forward – 1	3.9 mph (6.3 km/h)
Forward – 2	7.4 mph (12 km/h)
Forward – 3	13.1 mph (21.1 km/h)
Forward – 4	23.3 mph (37.5 km/h)
Note	Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
Reverse – 1	4.3 mph (7 km/h)
Reverse – 2	8.5 mph (13.7 km/h)
Reverse – 3	15 mph (24.2 km/h)
Reverse – 4	24.5 mph (39.5 km/h)

Weights

Operating Weight	78402 lb (35562.6 kg)
Note	Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles, secondary steering, sound suppression, and a 6.1 m3 (8.0 yd3) GP bucket with BOCE.
Note (1)	For 6.1 m3 (8.0 yd3) general purpose buckets with BOCE.
Note (2)	Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 6.1 m3 (8.0 yd3) general purpose bucket with BOCE.

Buckets

Bucket Capacities

4.6-12.0 m (6.0-15.75 yd)

Axles

Front	Fixed
Rear	Oscillating ?13 degrees
Maximum Single-Wheel Rise And Fall	22.5 in (570 mm)

Hydraulic System

Hydraulic Cycle Time – Total	10.1 s
Implement System – Maximum Operating Pressure	4975 psi
Implement Pump Type	Variable Displacement Piston
Implement System – Maximum Pump Output At 2,250 Rpm	119 gal/min
Implement System – Optional 3rd Function Maximum Flow	63 gal/min
Implement System – Optional 3rd Function Maximum Pressure	3159 psi
Hydraulic Cycle Time – Rated Payload – Raise From Carry Position	5.3 s
Hydraulic Cycle Time – Rated Payload – Dump, At Maximum Raise	1.7 s
Hydraulic Cycle Time – Rated Payload – Lower, Empty, Float Down	3.1 s
Hydraulic Cycle Time – Rated Payload – Total	10.1 s

Brakes

Brakes meet ISO 3450:2011 standards

Operating Specifications

Note (1)	For a machine configuration as defined under “Weight.”
Note (2)	Full compliance to ISO 143971:2007 Sections 1 thru 6.
Note	Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Breakout Force	58450 lb (26512.5 kg)
Static Tipping Load – Full 40 Degrees Turn – With Tire Deflection	46473 lb (21079.8 kg)
Static Tipping Load – Full 40 Degrees Turn – No Tire Deflection	49368 lb (22393 kg)

Service Refill Capacities

Cooling System	14 gal (53 L)
Fuel Tank Capacity	112.5 gal (425.9 L)
Crankcase	9.8 gal (37.1 L)
Def Tank	5.5 gal (20.9 L)
Hydraulic Tank	48 gal (181.7 L)
Transmission	20.3 gal (76.9 L)
Differential – Final Drives – Front	24.3 gal (92 L)
Differential – Final Drives – Rear	24.3 gal (92 L)

Sound

Note (1)	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)	**For machines in European Union countries and in countries that adopt the “EU Directives.”
Note (3)	***European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
Note	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed At Maximum Value – Operator Sound Pressure Level (Iso 6396:2008)	72 dB(A)
With Cooling Fan Speed At Maximum Value – Exterior Sound Power Level (Iso 6395:2008)	112 dB(A)
With Cooling Fan Speed At Maximum Value – Exterior Sound Pressure Level (Sae J88:2013)	78 dB(A)*
With Cooling Fan Speed At 70% Of Maximum Value – Operator Sound Pressure Level (Iso 6396:2008)**	72 dB(A)
With Cooling Fan Speed At 70% Of Maximum Value – Exterior Sound Power Level (Iso 6395:2008)**	109 LWA***

Cab

ROPS/FOPS

ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

Bucket Capacities

Bucket Range

4.6-12.0 m (6.0-15.75 yd)

Engine – Tier 3/Stage Iiia Equivalent

Emissions

Tier 3/Stage IIIA

Engine – Tier 4 Final/Stage Iv

Emissions	Tier 4/Stage IV
Engine Model	Cat C13 ACERT
Maximum Net Power – 1,700 Rpm – Sae J1349	398 hp (296.8 kw)
Peak Gross Torque – 1,200 Rpm – Sae J1995	1627 lb ft (2206 Nm)
Bore	5.2 in (130.1 mm)
Stroke	6.2 in (157 mm)
Displacement	763 cu in (12.6 L)
Note (1)	The power ratings apply at the stated speed when tested under the reference conditions for the specified standards.
Note (2)	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment.
Note (3)	The gross power advertised is with the fan at maximum speed.
Maximum Net Torque – 1,100 Rpm – Sae J1349	1518 lb ft (2058.2 Nm)
Maximum Power – 1,700 Rpm – Sae J1995	436 hp (325.2 kw)

Engine – Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent

Engine Model	Cat C13 ACERT
Maximum Power – 1,800 Rpm – Sae J1995	412 hp (307.3 kw)
Maximum Net Power – 1,800 Rpm – Sae J1349	373 hp (278.2 kw)
Peak Gross Torque – 1,300 Rpm – Sae J1995	1617 lb ft (2192.4 Nm)
Maximum Net Torque – 1,000 Rpm – Sae J1349	1505 lb ft (2040.6 Nm)
Bore	5.2 in (130.1 mm)
Stroke	6.2 in (157 mm)
Displacement	763 cu in (12.6 L)
Emissions	Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards.

Sound – Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent

Operator Sound Pressure Level – Iso 6396:2008	75 dB(A)
Exterior Sound Power Level – Iso 6395:2008*	112 dB(A)
Exterior Sound Pressure Level – Sae J88:2013**	78 dB(A)
Note (1)	The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment.
Note (2)	*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
Note (3)	**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value.

Sound – Tier 4 Final/Stage Iv

Note (1)	The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level – Iso 6396:2008	72 dB(A)
Exterior Sound Power Level – Iso 6395:2008*	112 dB(A)
Exterior Sound Pressure Level – Sae J88:2013**	78 dB(A)
Note (2)	*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
Note (3)	**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value.