Contents
Engine Details
| Net Power | 501 hp (373.6 kw) |
| Gross Power | 555 hp (413.9 kw) |
| Displacement | 1104.5 cu in (18.1 L) |
| Bore | 5.7 in (144.8 mm) |
| Stroke | 7.2 in (182.9 mm) |
| Net Power – Iso 9249 | 501 hp (373.6 kw) |
| Engine Model | Cat C18 ACERT |
| Net Power – Iso 14396 | 532 hp (396.8 kw) |
| Gross Power – Iso 3046-2 | 520 hp (387.8 kw) |
| Net Power – Eec 80/1269 | 501 hp (373.6 kw) |
Operational Specs
| Operating Weight | 128328 lb (58208.7 kg) |
Transmission
| Direct Drive – Forward 3 | 13.6 mph (21.9 km/h) |
| Direct Drive – Reverse 3 | 15.6 mph (25.2 km/h) |
| Direct Drive – Forward 4 | 24 mph (38.7 km/h) |
| Direct Drive – Forward 2 | 7.7 mph (12.4 km/h) |
| Direct Drive – Reverse 2 | 8.8 mph (14.2 km/h) |
Steering
| Steering | Meets SAE and ISO standards |
| Total Steering Angle | 74 degrees |
Transmission
| Converter Drive – Forward 3 | 12.9 mph (20.8 km/h) |
| Converter Drive – Reverse 3 | 14.7 mph (23.7 km/h) |
| Direct Drive – Forward 1 | Lock-up disabled |
| Converter Drive – Forward 4 | 22.3 mph (35.9 km/h) |
| Converter Drive – Forward 1 | 4.2 mph (6.8 km/h) |
| Converter Drive – Forward 2 | 7.3 mph (11.8 km/h) |
| Direct Drive – Reverse 1 | 4.9 mph (7.9 km/h) |
| Converter Drive – Reverse 1 | 4.7 mph (7.6 km/h) |
| Converter Drive – Reverse 2 | 8.4 mph (13.6 km/h) |
Weights
| Operating Weight | 128328 lb (58208.7 kg) |
Buckets
| Bucket Capacities | 6.4-7.7 m3 (8.3-10 yd3) |
Axles
| Front | Fixed |
| Rear | Oscillating 13 degrees |
| Maximum Single-Wheel Rise And Fall | 22.4 in (569 mm) |
Brakes
| Brakes | Meet SAE/ISO 3450:1996 |
Operating Specifications
| Tipping Load – Straight | 74651 lb (33861.2 kg) |
| Attachment Type | 9 yd3 Rock Bucket |
| Hinge Pin Height, Unloaded | 16.2 ft in (5 m) |
| Overall Length | 40.8 ft in (12.5 m) |
| Turning Radius – Sae Carry | 28.8 ft in (8.8 m) |
| Tipping Load – Articulated 43 Degrees | 66602 lb (30210.2 kg) |
| Breakout Force – Sae Rated (3.88 M Linkage) | 45977 lb (20854.9 kg) |
| Breakout Force – Sae Rated (4.25 M Linkage) | 116780 lb (52970.6 kg) |
Service Refill Capacities
| Cooling System | 27.2 gal (103 L) |
| Fuel Tank Capacity | 188 gal (711.7 L) |
| Crankcase | 15.9 gal (60.2 L) |
| Transmission | 18.5 gal (70.1 L) |
| Differential – Final Drives – Front | 49 gal (185.5 L) |
| Differential – Final Drives – Rear | 49 gal (185.5 L) |
| Hydraulic System Factory Fill | 124.2 gal (470.2 L) |
| Hydraulic System – Tank Only | 70.5 gal (266.9 L) |
Cab
| Cab – ROPS/FOPS | Meets SAE and ISO standards |
| Sound Performance | Meets ANSI, SAE and ISO standards |
Loader Hydraulic System
| Relief Valve Setting | 5075 psi |
| Cylinders, Double Acting – Lift, Bore And Stroke | 220 911 mm (8.7 35.9 in) |
| Cylinders, Double Acting – Tilt, Bore And Stroke | 220 1770 mm (8.7 69.7 in) |
| Relief Valve Setting – Low Idle | 348.1 psi |
| Main Hydraulic System Output At 2010 Rpm And 6900 Kpa (1000 Psi) | 130 gal/min |
| Pilot System – Gear-Type Pump Output At 2,010 Rpm And 2500 Kpa (363 Psi) | 20.1 gal/min |
