Contents
Engine Details
Net Power | 541 hp (403.5 kw) |
Rated Speed | 1700 rpm |
Displacement | 1105 cu in (18.2 L) |
Torque Rise | 58 % |
Bore | 5.7 in (144.8 mm) |
Stroke | 7.2 in (182.9 mm) |
Emissions | U.S. EPA Tier 4 Final/EU Stage IV Technology or Tier 2 Equivalent |
Net Power – Sae J1349 | 541 hp (403.5 kw) |
Engine Model | Cat C18 ACERT |
Peak Torque – 1,200 Rpm | 2104 lb ft (2852.7 Nm) |
Gross – Iso 14396 | 580 hp (432.6 kw) |
Peak Power Speed | 1,500 rpm |
Peak Power Speed – 1,500 Rpm – Gross – Iso 14396 | 580 hp (432.6 kw) |
Peak Power Speed – 1,500 Rpm – Gross – Sae J1995 | 588 hp (438.5 kw) |
Peak Power Speed – 1,500 Rpm – Net Power – Sae J1349 | 541 hp (403.5 kw) |
Operational Specs
Operating Weight | 139920 lb (63466.7 kg) |
Transmission
Transmission Type | Cat planetary power shift |
Forward – 1 | 4 mph (6.5 km/h) |
Forward – 2 | 7.2 mph (11.6 km/h) |
Forward – 3 | 12.7 mph (20.5 km/h) |
Forward – 4 | 21.6 mph (34.8 km/h) |
Reverse – 1 | 4.7 mph (7.6 km/h) |
Reverse – 2 | 8.3 mph (13.4 km/h) |
Direct Drive – Forward 3 | 13.9 mph (22.4 km/h) |
Direct Drive – Reverse 3 | 15.8 mph (25.5 km/h) |
Direct Drive – Forward 4 | 24.4 mph (39.3 km/h) |
Direct Drive – Forward 2 | 7.8 mph (12.6 km/h) |
Direct Drive – Reverse 2 | 8.9 mph (14.4 km/h) |
Direct Drive – Forward 1 | Lock-up disabled |
Direct Drive – Reverse 1 | 5 mph (8.1 km/h) |
Reverse – 3 | 14.4 mph (23.2 km/h) |
Axles
Front | Fixed |
Rear | Trunnion |
Oscillation Angle | 13 degrees |
Brakes
Brakes | SAE J1473 OCT90, ISO 3450:1992 |
Operating Specifications
Tipping Load – Straight | 78115 lb (35432.4 kg) |
Tipping Load – Articulated 37 Degrees | 68005 lb (30846.6 kg) |
Service Refill Capacities
Cooling System | 31.7 gal (120 L) |
Fuel Tank Capacity | 188 gal (711.7 L) |
Crankcase | 15.9 gal (60.2 L) |
Diesel Exhaust Fluid Tank | 8.7 gal (33 L) |
Transmission | 31.7 gal (120 L) |
Differential – Final Drives – Front | 49.1 gal (185.9 L) |
Differential – Final Drives – Rear | 49.1 gal (185.9 L) |
Hydraulic System Factory Fill | 125.5 gal (475.1 L) |
Hydraulic System – Tank Only | 63.4 gal (240 L) |
Hydraulic System – Lift/Tilt
Lift/Tilt System – Circuit | EH- Positive Flow Control, Flow Sharing |
Relief Valve Setting – Lift/Tilt | 4641 psi |
Cylinders, Double Acting – Lift, Bore And Stroke | 235 mm 976 mm (9.25 in 38.4 in) |
Cylinders, Double Acting – Tilt, Bore And Stroke | 292 mm 671 mm (11.5 in 26.4 in) |
Pilot System | Variable displacement piston |
Lift/Tilt System | Variable displacement piston |
Relief Valve Setting | 580 psi |
Maximum Flow | 13.7 gal/min |
Maximum Flow At 1,400-1,860 Rpm | 153 gal/min |
Hydraulic System – Steering
Steering System – Circuit | Pilot, load sensing |
Steering System – Pump | Piston, variable displacement |
Total Steering Angle | 74 degrees |
Relief Valve Setting – Steering | 4351 psi |
Steering Cycle Times – Low Idle | 5.6 s |
Steering Cycle Times – High Idle | 3.4 s |
Maximum Flow | 71.3 gal/min |
Sound Performance – Standard
Operator Sound Level (Iso 6396) | 71 dB(A) |
Machine Sound Level (Iso 6395) | 111 dB(A) |
Sound Performance – Suppression
Operator Sound Level (Iso 6396) | 70 dB(A) |
Machine Sound Level (Iso 6395) | 109 dB(A) |
Forks
Fork End Area | 69 ft2 (6.5 m2) |
Dimensions – Millyard Linkage
Ground To Top Of ROPS | 13.8 ft in (4.3 m) |
Ground To Top Of Exhaust Stacks | 13.8 ft in (4.3 m) |
Ground To Top Of Hood | 10.9 ft in (3.4 m) |
Ground To Bumper Clearance | 3.1 ft in (1 m) |
Rear Axle – Centerline To Bumper | 10.5 ft in (3.3 m) |
Front Axle Centerline To Fork Tip | 15.6 ft in (4.8 m) |
Wheel Base | 14.9 ft in (4.6 m) |
Maximum Overall Length | 41 ft in (12.5 m) |
Ground To Lower Hitch Clearance | 1.9 ft in (0.6 m) |
Ground To Center Of Front Axle | 3.2 ft in (1 m) |
Fork Height With Level Arms | 8.1 ft in (2.5 m) |
Fork Top Clamp Opening | 12.3 ft in (3.8 m) |
Fork Height At Maximum Lift | 15.3 ft in (4.7 m) |
Hinge Pin Height At Maximum Lift | 16.1 ft in (5 m) |
Dump Angle At Maximum Lift | 39.4 degrees |